Bedienungsanleitung Yamaha RX-V 685 (Seite 175 von 186) (Englisch)

699808

175

Zoom out

Zoom in

Vorherige Seite

1/186

Nächste Seite

Turn on the unit and playback devices and then turn on the TV.

Switch the TV input to display the video from the unit.

Check that the input, to which the playback device is connected

on the unit, is selected.

If not, select the input source manually.

Check that the video from the playback device is displayed on the

TV.

Check that the unit is properly synchronized with the TV by

turning off the TV or adjusting the TV volume with the TV remote

control.

NOTE

▪ If HDMI Control does not work properly, the problem may be solved by turning the playback device off and

on again, or by unplugging the power plug and plugging it in again. Also, HDMI Control may not work

properly if the number of connected devices exceeds the limit. In this case, disable HDMI Control on

devices not in use.

▪ If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting

on the TV.

▪ We recommend using TV and playback devices from the same manufacturer so that HDMI Control works

more effectively.

Audio Return Channel (ARC)

ARC allows you to input TV audio to the unit with the HDMI cable which transmits video

signal to the TV.

Check the following after the HDMI Control settings.

NOTE

For details on the HDMI Control settings, see the following:

▪ “HDMI Control and synchronized operations” (p.174)

Select a TV program with the TV remote control.

Check that the input source of the unit will be automatically

switched to “AUDIO1” and the TV audio will be played back on the

unit.

If you cannot hear the TV audio, check the following:

• “ARC” in the “Setup” menu is set to “On”. For details, see the following:

– “Setting the use of ARC” (p.115)

• The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack marked

“ARC”) on the TV.

Some HDMI jack on the TV is not compatible with ARC. For details, refer to the

instruction manual for the TV.

NOTE

▪ If the audio is interrupted while using ARC, set “ARC” in the “Setup” menu to “Off” and use a digital optical

cable to input TV audio to the unit. For details, see the following:

– “Setting the use of ARC” (p.115)

– “OPTICAL jack” (p.165)

▪ When using ARC, connect a TV with an HDMI cable that supports ARC.

▪ “AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO

1 jacks, use “

TV Audio Input” in the “Setup” menu to change the TV audio input assignment. To use the

SCENE function, you also need to change the input assignment for SCENE (7). For details, see the

following:

– “Setting the audio jack used for TV audio input” (p.115)

–

“Registering a scene” (p.76)

175

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V 685 Seite 175

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V 685

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info