Bedienungsanleitung Yamaha RX-V 685 (Seite 4 von 124) (Englisch, Französisch, Portugiesisch, Spanisch)

699808

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

4 En

Handling caution

• Do not touch the surface having this label. Doing so may cause burns. The

label on the device indicates that the surface to which the label is attached may

become hot during operation.

• Do not insert your hand or fingers into the ventilation holes of this unit. Failure to observe

this may cause injury.

• Do not insert foreign materials such as metal or paper into the ventilation holes of this unit.

Failure to observe this may cause a fire, electric shocks, or malfunctions. If foreign material

gets into the unit, immediately shut off the power and pull the power plug from the AC outlet

and request an inspection from the dealer where you purchased the unit or from qualified

Yamaha service personnel.

• Do not do the following:

- put heavy items on top of the equipment.

- place the equipment in a stack.

- apply unreasonable force to buttons, switches, input/output terminals, etc.

• Avoid pulling the connected cables to prevent injuries or damage to the unit by causing it to

fall.

Battery use

• Always replace all batteries at the same time. Do not use new batteries together with old

ones. Using new ones with old ones could cause a fire, burns, or inflammation due to fluid

leaks.

• Do not use batteries other than specified batteries. Doing so cause fire, burns, or

inflammation due to leakage.

• Do not mix battery types, such as alkaline batteries with manganese batteries, or batteries

from different makers, or different types of batteries from the same maker, since this can

cause a fire, burns, or inflammation due to fluid leaks.

• Keep batteries away from children. A child could accidentally swallow a battery. Failure to

observe this may also cause inflammation due to battery fluid leaks.

• Do not put in a pocket or bag, carry, or store batteries together with pieces of metal. The

battery could short, burst, or leak, causing a fire or injury.

• Always make sure all batteries are inserted in conformity with the +/- polarity markings.

Failure to do so might result in a fire, burns, or inflammation due to fluid leaks.

• When the batteries run out, or if the unit is not to be used for a long time remove the

batteries from the remote control to prevent possible leakage of the battery fluid.

• When storing or discarding batteries, insulate the terminal area by applying tape, or some

other protection. Mixing them with other batteries or metal objects can cause a fire, burns,

or inflammation due to fluid.

Notice

Indicates points that you must observe in order to prevent

product failure, damage or malfunction and data loss.

Power supply/power cord

• If not using the unit for a long period of time, be sure to pull the power plug from the outlet.

Even if the z (Standby/On) switch has been turned off (the screen display is off), a minute

current is still flowing.

Installation

• Do not use this unit in the vicinity of other electronic equipment, such as a TV, radio, or

mobile phone. Failure to observe this may cause this unit or the TV or radio to produce

noise.

• Do not use this unit in a location that is exposed to direct sunlight, that becomes extremely

hot, such as near a heater, or extremely cold, or that is subject to excessive dust or

vibration. Failure to observe this may cause the unit's panel to become deformed, the

internal components to malfunction, or for operation to become unstable.

• Install this unit as far away from other electronic equipment as possible.

Digital signals from this unit may interfere with other electronic equipment.

• If using a wireless function, avoid installing this unit near metal walls or desks, microwave

ovens, or other wireless network devices.

Obstructions could shorten the transmission distance.

Connections

• If connecting external units, be sure to thoroughly read the manual for each unit and

connect them in accordance with the instructions.

Failure to properly handle a unit in accordance with the instructions could cause

malfunctions.

• Do not connect this unit to industrial units.

Digital audio interface standards for consumer use and industrial use are different. This unit

has been designed to connect to a consumer-use digital audio interface. Connections to an

industrial-use digital audio interface could not only cause this unit to malfunction, but could

also damage the speakers.

Handling

• Do not place vinyl, plastic, or rubber products on this unit. Failure to observe this may cause

discoloration or deformation in the panel of this unit.

• If the ambient temperature changes drastically (such as during unit transportation or under

rapid heating or cooling) and there is a chance condensation may have formed in the unit,

leave the unit for several hours without turning on the power until it is completely dry before

use. Using the unit while there is condensation can cause malfunctions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V 685 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V 685

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info