Bedienungsanleitung Yamaha RX-V100D (Seite 33 von 88) (Englisch)

558948

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

PLAYBACK

BASIC

OPERATION

English

■ Downmixing to 2 channels

You can enjoy 2-channel stereo playback even from multi-

channel sources.

Rotate PROGRAM (or press AMP to select the

AMP mode, then press STEREO on the remote

control) to select 2ch Stereo.

2ch Stereo

You can use a subwoofer with this program when SWFR or

BOTH is selected in “BASS OUT”.

■ Listening to unprocessed input signals

In STRAIGHT mode, two channel stereo sources are

output from only the front left and right speakers. Multi-

channel sources are decoded straight into the appropriate

channels without any additional effect processing.

Press STRAIGHT (or press AMP to select the

AMP mode, then press STRAIGHT on the remote

control) to select STRAIGHT.

STRAIGHT

Press STRAIGHT (EFFECT) again so that “STRAIGHT”

disappears from the display when you want to turn the

sound effect back on.

■ Virtual CINEMA DSP

Virtual CINEMA DSP allows you to enjoy the CINEMA

DSP programs without surround speakers. It creates

virtual speakers to reproduce the natural sound field.

If you set “SUR. LR” to NONE (see page 59), Virtual

CINEMA DSP activates automatically whenever you

select a CINEMA DSP sound field program.

Virtual CINEMA DSP will not activate, even when “SUR. LR” is

set to NONE (see page 59) in the following cases:

– When MULTI CH INPUT is selected as the input source.

– When headphones are connected to the PHONES jack.

– When you select a 2ch Stereo, 6ch Stereo, DIRECT STEREO

or SUR. STANDARD as a sound field program.

This unit comes with a variety of input jacks. Do the

following to select the type of input signals you want to

use.

1 Rotate INPUT to select the input source.

2 Press INPUT MODE to select an input mode.

In most cases, use AUTO.

AUTO Automatically selects input signals in

the following order:

1) Digital signals

2) Analog signals

DTS Selects only digital signals encoded in

DTS. If no DTS signals are input, no

sound is output.

ANALOG Selects only analog signals. If no

analog signals are input, no sound is

output.

* If this unit detects a Dolby Digital or DTS signal, the

decoder automatically switches to the appropriate

decoder.

You can adjust the default input mode of this unit (see page 62).

• When playing a DTS-CD/LD, be sure to set INPUT MODE to

DTS.

• If the digital output data of the player has been processed in any

way, you may not be able to perform DTS decoding even if you

make a digital connection between this unit and the player

depending on the player.

Note

Front panel

Remote control

AMP

STEREO

PROGRAM

STRAIGHT

ENT.

EFFECT

STRAIGHT

Front panel

Remote control

AMP

Selecting input modes

Notes

INPUT

INPUT MODE

CDTUNER

MD/CD-R

DVD

DTV/CBL

V-AUX

VCR

VOLUME

Input modeInput source

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V100D Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V100D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info