Bedienungsanleitung Yamaha RX-V100D (Seite 37 von 88) (Englisch)

558948

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

FM/AM TUNING

BASIC

OPERATION

English

3 Press and hold MEMORY (MAN’L/AUTO FM)

for more than 3 seconds.

The preset number, the MEMORY and AUTO

indicators flash. After about 5 seconds, automatic

presetting starts from the frequency currently

displayed and proceeds toward the higher

frequencies.

When automatic preset tuning is completed, the front

panel display shows the frequency of the last preset

station.

• Any stored station data existing under a preset number is

cleared when you store a new station under that preset number.

• If the number of received stations does not reach 40 (E8),

automatic preset tuning has automatically stopped after

searching all stations.

• Only FM stations with sufficient signal strength are stored

automatically by automatic preset tuning. If the station you

want to store is weak in signal strength, tune into it manually

and store it by following the procedure in “Manually presetting

stations”.

Automatic preset tuning options:

You can select the preset number from which this unit will

store FM stations and/or begin tuning toward lower

frequencies.

After pressing MEMORY in step 3:

1 Press A/B/C/D/E (NEXT), then PRESET/CH

l / h to select the preset number under which the

first station will be stored. Automatic preset tuning will

stop when stations have all been stored up to E8.

2 Press PRESET/TUNING (EDIT) to turn off the colon

(:) and then press PRESET/TUNING l to begin

tuning toward the lower frequencies.

■ Manually presetting stations

You can also store up to 40 stations (8 stations x 5 groups)

manually.

1 Tune into a station.

See page 33 for tuning instructions.

When tuned into a station, the front panel display

shows the frequency of the station received.

2 Press MEMORY (MAN’L/AUTO FM).

The MEMORY indicator flashes for about 5 seconds.

3 Press A/B/C/D/E (NEXT) repeatedly to select

a preset station group (A to E) while the

MEMORY indicator is flashing.

The group letter appears. Check that the colon (:)

appears in the front panel display.

Notes

Memory back-up

The memory back-up circuit prevents the stored data

from being lost even if this unit is set in the standby

mode, the power cord is disconnected from the AC

outlet, or the power supply is temporarily cut due to

power failure. However, if the power is cut for more

than one week, the preset stations may be cleared. If

so, store the stations again by using the presetting

station methods.

MAN'L/AUTO FM

MEMORY

CDTUNER

MD/CD-R

DVD

DTV/CBL

V-AUX

VCR

AUTO

TUNED

VOLUME

MEMORY

L R

AUTO/MAN'L DISPLAYMAN'L/AUTO FMLEVEL

EFFECT

MEMORY

FM/AMPRESET/TUNING

A/B/C/D/E

PROGRAM

l PRESET/TUNING h

TUNING MODE

INPUT MODETONE CONTROLSTRAIGHT

SPEAKERS

PHONES

SILENT CINEMA

MULTI CH

INPUT

VOLUME

INPUT

VIDEO L AUDIO R

VIDEO AUX

EDIT

SEARCH MODE DAB

DISPLAY

STANDBY

/ON

43 2,5

CDTUNER

MD/CD-R

DVD

DTV/CBL

V-AUX

VCR

TUNED

VOLUME

MEMORY

MAN'L/AUTO FM

MEMORY

Flashes

A/B/C/D/E

CDTUNER

MD/CD-R

DVD

DTV/CBL

V-AUX

VCR

TUNED

VOLUME

MEMORY

Preset group

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V100D Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V100D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info