Bedienungsanleitung Yamaha RX-V1071 (Seite 125 von 138) (Englisch)

516913

125

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

En 125

Remote control

The files in the PC cannot be viewed or

played back.

The files are not supported by this unit or the media server.

Use the file format supported by both this unit and the media server. For

information about the file formats supported by this unit, see “Playing back music

stored on PCs” (p.70).

The Internet radio cannot be played.

The selected Internet radio station is currently not available.

It may not be available to listen because there might be a network problem, or the

station might be broadcasting in limited hour. Try the station later or select another

station.

The selected Internet radio station broadcasts audio silence

currently.

Some Internet radio stations broadcast audio silence during particular periods of

time in a day. Try the station later or select another station.

Access to the network is restricted by the firewall settings of your

network devices (router, etc).

Check the firewall settings of your network devices. The Internet radio can be

played only when it passes through the port designated by each radio station.

The port number is variable depending on radio station.

Problem Cause Remedy

This unit cannot be controlled using the

remote control.

Out of the operating range. Use the remote control in the operating range (p.5).

The batteries are weak. Replace with new batteries.

Direct sunlight or lighting is striking the remote control sensor of

this unit.

Adjust the lighting angle, or reposition this unit.

The remote control is set to control external devices.

Press SOURCE/RECEIVER to set the remote control to control this unit (the key

lights up in orange).

The remote control IDs of the main unit and remote control are not

identical.

Change the remote control ID of the main unit or remote control (p.113).

External devices cannot be controlled

using the remote control.

The remote control is set to control this unit.

Press SOURCE/RECEIVER to set the remote control to control external devices

(the key lights up in green).

The corresponding remote control code is not set properly.

Set the remote control code again (p.115). Even if the remote control code is

registered properly set, some products may not respond to the remote control.

The remote control does not learn new

functions.

(China and Europe models only)

The batteries of the remote control of this unit and/or the external

device are weak.

Replace with new batteries.

The distance between the two remote controls is not appropriate. Place the remote controls at a proper distance (p.117).

The signal coding or modulation of the other remote control is not

compatible with this remote control.

Learning is impossible in this case.

Memory capacity is full.

Clear unnecessary assignments to free some memory space for the new

functions (p.118).

Problem Cause Remedy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V1071 Seite 125

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V1071

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info