Bedienungsanleitung Yamaha RX-V2400 (Seite 61 von 91) (Englisch)

558954

Zoom out

Zoom in

Vorherige Seite

1/91

Nächste Seite

English

SET MENU

ADVANCED

OPERATION

■ Parameter initialization PARAM. INI

Use this feature to initialize the parameters for each sound

field

program within a sound field program group. When

you initialize a sound

field program group, all of the

parameter values within that group revert to their initial

settings.

MANUAL SETUP > OPTION MENU >

PARAM. INI >

Press the corresponding numeric button for the sound

field

program that you want to initialize.

An asterisk (*) next to a program number means that the

parameter values have been changed from their initial

settings.

• You cannot automatically revert to the previous parameter

settings once you initialize a

sound field program group.

• You cannot separately initialize individual

sound field

programs.

• You cannot initialize any program groups when MEMORY

GUARD is set to ON.

■ Speaker impedance setting SP IMP.SET

Use to select the impedance of your speakers.

MANUAL SETUP > OPTION MENU >

SP IMP.SET >

Choices: 6ohms, 8ohms

■ Zone set ZONE SET

Use to specify the location of speakers connected the

SPEAKERS B terminals.

MANUAL SETUP > OPTION MENU >

ZONE SET >

SP B

Use this feature to select the location of the front speakers

connected to the SPEAKERS B terminals.

Choices: FRONT, ZONE B

• Select FRONT to turn on/off SPEAKERS A and B

when the speakers connected to the SPEAKERS B

terminals are set in the main room.

• Select ZONE B if the speakers connected to the

SPEAKERS B terminals are set in another room. If

SPEAKERS A is turned OFF and SPEAKERS B is

turned ON, all the speakers including the subwoofer in

the main room are muted and the unit outputs sound

from SPEAKERS B only.

• If you connect headphones to the PHONES jack on the unit, the

sound is output from both headphones and SPEAKERS B.

• When a DSP program is selected, the unit automatically enters

the Virtual CINEMA DSP mode.

■ Zone 2 set ZONE2 SET

(U.S.A., Canada and Australia models only)

MANUAL SETUP > OPTION MENU >

ZONE2 SET >

Output volume OUTPUT VOL

Use to select how the volume control will operate with

regard to the ZONE 2 OUTPUT jacks.

Choices: VAR., FIX

• Select VAR. to adjust the ZONE 2 OUTPUT volume

simultaneously with VOLUME –/+ on the remote

control.

• Select FIX to fix the ZONE 2 OUTPUT volume level

to a standard line level.

Zone 2 amplifier ZONE2 AMP

Use to select how the ZONE 2 speakers will be amplified.

Choices: ON, OFF

• Select OFF if you do not use Zone 2 speakers or if you

connect your Zone 2 speakers through an external

amplifiers connected to this unit’s ZONE 2 OUTPUT

jacks.

• Select ON to use this unit’s internal amplifier if you

connect your Zone 2 speakers directly to this unit’s

PRESENCE/ZONE 2 speaker terminals.

Notes

123*4

*5678

9 *0 +10

C)PARAM. INI

/ : Exit

-/+ : Select

Minimum 8ohms

D)SP IMP.SET

/ : Exit

-/+ : Select

SP_B;;;;;;FRONT

E)ZONE SET

Notes

/ : Up/Down

-/+ : Select

OUTPUT VOL;;VAR.

ZONE2 AMP;;;OFF

F)ZONE2 SET

01EN00_RX-V2400RDS_EN.book Page 59 Thursday, November 6, 2003 11:49 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V2400 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V2400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info