Bedienungsanleitung Yamaha RX-V2400 (Seite 88 von 91) (Englisch)

558954

Zoom out

Zoom in

Vorherige Seite

1/91

Nächste Seite

GLOSSARY

■ SILENT CINEMA

YAMAHA has developed a natural, realistic sound effect

DSP algorithm for headphones.

Parameters for headphones have been set for each sound

field so that accurate representations of all the sound field

programs can be enjoyed on headphones.

■ Virtual CINEMA DSP

YAMAHA has developed a Virtual CINEMA DSP

algorithm that allows you to enjoy DSP sound field

surround effects even without any surround speakers by

using virtual surround speakers.

It is even possible to enjoy Virtual CINEMA DSP using a

minimal two-speaker system that does not include a center

speaker.

■ Composite Video signal

With the composite video signal system, the video signal

is composed of three basic elements of a video picture;

color, brightness and synchronization data. A composite

video jack on a video component transmits these three

elements combined.

■ S VIDEO signal

With the S VIDEO signal system, the video signal

normally transmitted using a pin cable is separated and

transmitted as the Y signal for the luminance and the C

signal for the chrominance through the S VIDEO cable.

Using the S VIDEO jack eliminates video signal

transmission loss and allows recording and playback of

even more beautiful images.

■ Component video signal

With the component video signal system, the video signal

is separated into the Y signal for the luminance and the PB

and P

R signals for the chrominance. Color can be

reproduced more faithfully with this system because each

of these signals is independent. The component signal is

also called the “color difference signal” because the

luminance signal is subtracted from the color signal.

A monitor with component input jacks is required in order

to use the component signal for output.

■ PCM (Linear PCM)

Linear PCM is a signal format under which an analog

audio signal is digitized, recorded and transmitted without

using any compression. This is used as a method of

recording CDs and DVD audio. The PCM system uses a

technique for sampling the size of the analog signal per

very small unit of time. Standing for “pulse code

modulation”, the analog signal is encoded as pulses and

then modulated for recording.

■ Sampling frequency and number of

quantized bits

When digitizing an analog audio signal, the number of

times the signal is sampled per second is called the

sampling frequency, while the degree of fineness when

converting the sound level into a numeric value is called

the number of quantized bits.

The range of rates that can be played back is determined

based on the sampling rate, while the dynamic range

representing the sound level difference is determined by

the number of quantized bits. In principle, the higher the

sampling frequency, the wider the range of frequencies

that can be played back, and the higher the number of

quantized bits, the more finely the sound level can be

reproduced.

■ THX Cinema processing

THX is an exclusive set of standards and technologies

established by the world-renowned film production

company, Lucasfilm Ltd. THX grew from George Lucas’

personal desire to make your experience of the film

soundtrack, in both movie theatres and in your home

theatre, as faithful as possible to what the director

intended.

Movie soundtracks are mixed in special movie theatres

called dubbing stages and are designed to be played back

in movie theatres with similar equipment and conditions.

This same soundtrack is then transferred directly onto

Laserdisc, VHS tape, DVD, etc., and is not changed for

playback in a small home theatre environment.

THX engineers developed patented technologies to

accurately translate the sound from the movie theatre

environment into the home, correcting the tonal and

spatial errors that occur. On this product, when the THX

indicator is on, THX features are automatically added in

Cinema modes (e.g. THX Cinema, THX Surround EX).

■ Re-Equalization

The tonal balance of a film soundtrack will be excessively

bright and harsh when played back over audio equipment

in the home because film soundtracks were designed to be

played back in large movie theatres using very different

professional equipment. Re-Equalization restores the

correct tonal balance for watching a movie soundtrack in a

small home environment.

01EN00_RX-V2400RDS_EN.book Page 86 Thursday, November 6, 2003 11:49 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V2400 Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V2400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info