Bedienungsanleitung Yamaha RX-V2500 (Seite 37 von 107) (Englisch)

558955

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

English

PLAYBACK

BASIC

OPERATION

■ Selecting the MULTI CH INPUT

Press MULTI CH INPUT so that “MULTI CH INPUT”

appears in the front panel display and video monitor.

When “MULTI CH INPUT” is shown on the front panel display

and/or the video monitor, no other source can be played. To select

another input source with INPUT (one of the input selector

buttons), press MULTI CH INPUT to turn off “MULTI CH

INPUT” from the front panel display and the video monitor.

■ Enjoying multi-channel software in

6.1/7.1 channel surround

If you connected one or two surround back speakers, use

this feature to enjoy 6.1/7.1-channel playback for multi-

channel sources using the Dolby Pro Logic IIx, Dolby

Digital EX or DTS-ES decoders.

Set AMP/SOURCE/TV to AMP, then press EXTD.

SUR on the remote control to switch between 5.1

and 6.1/7.1 channel playback.

To select a decoder, press l / h repeatedly

when PLIIxMovie (etc.) is displayed.

Auto (AUTO)

When a signal (flag) that can be recognized by the unit is

input, the unit selects the optimum decoder for playing

back the signal in 6.1/7.1 channels.

If the unit cannot recognize the flag or no flag is present in

the input signal, it cannot automatically be played in 6.1/

7.1 channels.

Decoders (select with l / h)

You can select from the following modes depending on the

format of the software you are playing.

PLIIxMovie

For playing back Dolby Digital or DTS signals in 7.1

channels using the Pro Logic IIx movie decoder.

PLIIxMusic

For playing back Dolby Digital or DTS signals in 6.1/7.1

channels using the Pro Logic IIx music decoder.

EX/ES

For playing back Dolby Digital signals in 6.1/7.1 channels

using the Dolby Digital EX decoder.

DTS signals are played back in 6.1/7.1 channels using the

DTS-ES decoder.

For playing back Dolby Digital or DTS signals in 6.1/7.1

channels using the Dolby Digital EX decoder.

Off (OFF)

For playing back Dolby Digital or DTS signals in 5.1

channels.

When Surround Back is set to “Large x1” or “Small x1” (see

page 62), the surround back channel will output from the left

SURROUND BACK speaker terminals.

• Some 6.1-channel compatible discs do not have a signal (flag)

which this unit can automatically detect. When playing these

kinds of discs with 6.1-channel, select decoders (PLIIxMovie,

PLIIxMusic, EX/ES or EX) manually.

• 6.1/7.1-channel playback is not possible even if EXTD. SUR is

pressed in the following cases:

– When Surround or Surround Back is set to “None” (see

page 62).

– When the source connected to the MULTI CH INPUT jack is

being played.

– When the source being played does not contain surround L/R

channel signals.

– When a Dolby Digital KARAOKE source is being played.

– When 2ch Stereo, 7ch Stereo or PURE DIRECT is selected.

• When the power of this unit is turned off, the input mode will be

reset to AUTO.

• The Pro Logic IIx decoder is not available when Surround Back

is set to “None” (see page 62).

• “PLIIxMovie” cannot be selected when Surround Back is set to

“Large x1” or “Small x1” (see page 62).

Note

MULTI CH

INPUT

MULTI CH IN

Front panel Remote control

EXTD. SUR

Notes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V2500 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info