Bedienungsanleitung Yamaha RX-V2500 (Seite 85 von 107) (Englisch)

558955

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

English

ZONE 2/ZONE 3 (U.S.A., CANADA, U.K., EUROPE AND AUSTRALIA MODELS ONLY)

ADVANCED

OPERATION

3 Press an input selector button to select the

input source you want to listen to in the

second/third room.

The display window shows “2: name of selected

input” or “3: name of selected input” if the remote

control is in the Zone 2/Zone 3 mode.

Signals input to V-AUX and PHONO jacks cannot be sent to

Zone 2/Zone 3.

4 You can control the unit from Zone 2 or Zone

3 by using the input selector, STANDBY,

SYSTEM POWER, MUTE and VOLUME +/–

buttons.

* VOLUME +/– can be used only when Zone2 Volume or

Zone3 Volume is set to “Variable” in the GUI menu (see

page 66).

5 Press SELECT k / n to exit from the Zone 2/

Zone 3 mode.

• The source in Zone 2 and the source available for recording are

always the same.

• “ZONE2” or “ZONE3” will appear in the display window only

when k is pressed, and “SYSTM” only when n is pressed

■ Turning this unit to either on or standby

SYSTEM POWER and STANDBY work differently

depending on the selected mode that appears on the

display window.

• When normal, Zone 2 or Zone 3 mode is selected, you

can turn the main unit, Zone 2 or Zone 3 to on/standby

individually.

• When System mode is selected, or when “2000” or

“2002” (see page 71) is selected as the amplifier library

(L:AMP) code, you can turn the main unit, Zone 2 and

Zone 3 to on/standby simultaneously.

“MAIN” appears for a few seconds when SYSTEM POWER

or STANDBY is pressed.

■ Special considerations for DTS software

The DTS signal is a digital bitstream. If you attempt to

send the DTS signal to the second/third room you will

only hear digital noise (that may damage your speakers).

Thus, the following considerations and adjustments need

to be made when playing DTS encoded discs.

For DVDs encoded with DTS

Only 2 channel analog audio signals may be sent to the

second/third room.

Use the disc menu to set the DVD player’s mixed 2-

channel left and right audio outputs to the PCM or Dolby

Digital soundtrack.

For CDs encoded in DTS

To avoid unexpected noise, DO NOT USE the Zone 2/

Zone 3 feature with CDs encoded in DTS.

Note

Notes

DTV DVR/VCR2VCR 1 DVD

AUX

CBL/SAT MD/TAPE

CD-R

PHONO TUNER CD

MULTI CH IN

SLEEP

INPUT MODE

DTV DVR/VCR2VCR 1 DVD

AUX

CBL/SAT MD/TAPE

CD-R

PHONO TUNER CD

MULTI CH IN

POWER POWER POWER

SYSTEM

STANDBY

AVTV

SLEEP

INPUT MODE

EXIT

TOP

PURE DIRECT

TITLE

A/B/C/D/E

SELECT

VOL

–

TV VOL

TV MUTE TV INPUT

MUTE

–

AMP

SOURCE

LCD display

SYSTEM POWER/

STANDBY

Normal mode

Name of component

Turns the main unit

on/standby

Zone 2 mode

“Zone2” or “2:name of

component”

Turns Zone 2 to on/

standby

Zone 3 mode

“Zone3” or “3:name of

component”

Turns Zone 3 to on/

standby

System mode

“SYSTM”

Turns everything (the

main unit, Zone 2,

Zone 3) on/standby

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V2500 Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info