Bedienungsanleitung Yamaha RX-V2500 (Seite 91 von 107) (Englisch)

558955

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

EDITING SOUND FIELD PARAMETERS

English

ADDITIONAL

INFORMATION

A significant factor that creates the rich, full tones of a live

instrument are the multiple reflections from the walls of

the room. In addition to making the sound “live”, these

reflections enable us to tell where the player is situated,

and the size and shape of the room in which we are sitting.

■ Elements of a sound field

In any environment, in addition to the direct sound coming

straight to our ears from the player’s instrument, there are

two distinct types of sound reflections that combine to

make up the sound field:

Early reflections

Reflected sounds reach our ears extremely rapidly (50 ms

– 100 ms after the direct sound), after reflecting from one

surface only – for example, from the ceiling or a wall.

Early reflections help add clarity to the direct sound.

Reverberations

These are caused by reflections from more than one

surface – walls, ceiling, the back of the room – so

numerous that they merge together to form a continuous

sonic “afterglow”. They are non-directional, and lessen

the clarity of the direct sound.

Direct sound, early reflections and subsequent

reverberation taken together help us to determine the

subjective size and shape of the room, and it is this

information that the digital sound field processor

reproduces in order to create sound fields.

If you could create the appropriate early reflections and

subsequent reverberations in your listening room, you

would be able to create your own listening environment.

The acoustics in your room could be changed to those of a

concert hall, a dance floor, or virtually any size room at

all. This ability to create sound fields at will is exactly

what YAMAHA has done with the digital sound field

processor.

You can enjoy good quality sound with the factory preset

parameters. Although you do not have to change the initial

settings, you can change some of the parameters to better

suit the input source or your listening room. The following

parameters are not always found in every program.

1 Set AMP/SOURCE/TV to AMP.

2 Press TOP on the remote control.

3 Select Stereo/Surround, then press h.

4 Select the desired sound field program, then

press h to access and adjust.

You cannot change parameter values when Memory Guard is set

to “Guard”. If you want to change the parameter values, set

Memory Guard to “Free” (see page 67).

■

Resetting parameters to the factory values

To reset all parameters

Use Surr.Initialize (see page 66).

EDITING SOUND FIELD PARAMETERS

What is a sound field? Changing parameter settings

Note

Memory back-up

The memory back-up circuit prevents the stored data from

being lost even if this unit is set in the standby mode, the

power cable is disconnected from the AC outlet, or the power

supply is temporarily cut due to power failure. However, if

the power is cut for more than one week, the parameter values

will return to the factory settings. If this happens, edit the

parameter value again.

AMP

SOURCE

STEREO

MUSIC

ENTERTAINMENT

MOVIE THEATER

Vienna

Freiburg

Munich

Vienna

Freiburg

Init. Delay

Room Size

DSP Level

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V2500 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info