544424
84
Zoom out
Zoom in
Vorherige Seite
1/903
Nächste Seite
82
SYSTEM OPTIONS
HDMI Aspect (HDMI aspect ratio)
Use to select the HDMI aspect ratio.
Choices: Through, 16:9 Normal
Select “Through” if you do not make any adjustments
to the HDMI aspect ratio.
Select “16:9 Normal” if you want to display video
images with 4:3 of HDMI aspect ratio on your video
monitor with 16:9 of HDMI aspect ratio. Black stripes
appear on the right and left sides as a result.
When HDMI Up-Scaling is set to Through (see page 81), you
cannot make any adjustments to HDMI Aspect.
Short Message (Short message)
Use to select whether to display short messages regarding
system operations on your video monitor.
Choices: Off, On
Select “Off” if you do not want to display any short
messages.
Select “On” if you want to display short messages.
The short message display may not display properly depending
on the type of input signal and video monitor used.
If Conversion is set to Off, the short message display is not
displayed even if On is selected.
Position (Position)
Use to adjust the vertical and horizontal position of the
GUI display.
Control range: –5 (downward/left) to +5 (upward/right)
•Press k to raise the position of the GUI display.
•Press n to lower the position of the GUI display.
•Press h to shift the position of the GUI display to the
right.
Press
l
to shift the position of the GUI display to the left.
Wall Paper (Wall paper)
Use to select the background of the GUI display.
Choices: None, Yes, Gray
Select “None” not to display any background in the
GUI display.
Select “Yes” to display a background image in the GUI
display.
Select “Gray” to display a gray background in the GUI
display.
If Video Conv. is set to “Off”, no background is displayed even if
“Yes” is selected.
Note
Notes
16:9 Normal
Through
HDMI Aspect
Short Message
Position
HDMI Up-Scaling
Component I/P
Off
On
Short Message
Position
Wall Paper
HDMI Aspect
HDMI Up-Scaling
Note
Position
Wall Paper
Short Message
HDMI Aspect
:-5
+
:+5 //
None
Gray
Yes
Wall Paper
Position
Short Message
84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

yamaha-rx-v2600

Suche zurücksetzen

  • seit der umstellung von analog auf digital habe ich keinen ukw empfang mehr Eingereicht am 7-1-2020 20:36

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha RX-V2600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha RX-V2600

Yamaha RX-V2600 Bedienungsanleitung - Deutsch - 135 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info