Bedienungsanleitung Yamaha RX-V3000RDS (Seite 61 von 78) (Englisch)

549968

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

English

Digital Sound Field Processing (DSP)

Understanding Sound Fields

A sound field is defined as the “characteristic sound reflections of a particular space.”

In concert halls and other music venues, we hear early reflections and reverberations

as well as the direct sound produced by the artist(s). The variations in the early

reflections and other reverberations among the different music venues is what gives

each venue its special and recognizable sound quality.

Yamaha sent teams of sound engineers all around the world to measure the sound

reflections of famous concert halls and music venues, and collect detailed sound field

information such as the direction, strength, range, and delay time of those reflections.

Then we stored this enormous amount of data in the ROM chips of this unit.

■ Recreating a sound field

Recreating the sound field of a concert hall or an opera house requires localizing the

virtual sound sources in your listening room. The traditional stereo system that uses

only two speakers is not capable of recreating a realistic sound field. Yamaha’s DSP

requires four effect speakers to recreate sound fields based on the measured sound

field data. The processor controls the strength and delay time of the signals output

from the four effect speakers to localize the virtual sound sources in a full circle

around the listener.

The DSP sound field programs can be classified in two types based on the sound field

processing method: programs that use early reflections only and programs that use

both early reflections and reverberation.

■ E/R (Early Reflection)

Each sound field is distinguished by the structure of the reflected sound. The increased processing capability of DSP technology enables

Yamaha engineers to incorporate even minute reflections with long delay times into the sound field data.

■ 4ch REV. (Four Channel Reverberation)

This type of program consists of early reflections and high quality digital reverberation processing. Reverberation is the most important

element for recreating the sound field of a church, for example. To recreate a realistic spatial sound image from reverberation data, Yamaha

has adapted the four-channel-output reverberation technology.

■ Illustration of the virtual sound sources and echo patterns

The virtual sound sources and echo patterns for the DSP sound field programs are shown below. The illustration of the virtual sound sources

shows early reflection sound only and the illustration of the echo patterns shows both reflected sound and reverberation.

Virtual Sound Sources

The center of these circles represents the virtual

sound source.

The size of the circle indicates the strength of the

virtual sound source.

The direct sound source

The listening position

Echo Patterns

Direct sound source

Early

reflections Reverbration

50~80 mSec

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V3000RDS Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info