Bedienungsanleitung Yamaha RX-V3067 (Seite 63 von 166) (Englisch)

516915

Zoom out

Zoom in

Vorherige Seite

1/166

Nächste Seite

PLAYBACK

Configuring settings specific to an individual input source (Option menu)

En 63

■

Adjusting high/low-frequency sound

Tone Control

You can adjust the balance of the high-frequency range (Treble)

and low-frequency range (Bass) of sounds output from the front

left and right speakers to obtain desired tone.

■

Auto-adjusting the sound level to make

even low volumes more audible

Adaptive DRC

Adjusts the dynamic range in conjunction with the volume level

(from minimum to maximum). When this item is set to “On,”

dialogue and sound effects are clearer. J1

When “On” is selected, the dynamic range is adjusted as follows.

If the volume level is low, the dynamic range is narrow.

If the volume level is high, the dynamic range is wide.

■

Enjoying more spatial sound fields

CINEMA DSP 3D Mode

When CINEMA DSP 3D is enabled, set whether to use sound

programs in CINEMA DSP 3D mode (☞

p. 55).

■

Adjusts the vertical position of dialogues

Dialogue Lift

Adjusts the vertical position of center sound such as dialogues

when presence speakers are used. Increasing this parameter raises

the position.

If the dialog seems to come out from a lower position than the

video monitor screen, increase this parameter.

“0” (default) corresponds to the lowest position and “5” to the

highest position.

■

Selecting the 5.1-channel signal playback

method

Extended Surround

Selects whether to reproduce 5.1-channel input signals in 6.1- or

7.1-channel when surround back speakers are used. J2

Adjustable range -6.0 dB to +6.0 dB

Adjustment

increments

0.5 dB

Off (Default) Does not adjust the dynamic range automatically.

On Adjusts the dynamic range automatically.

Input Level Input Level

Volume: low Volume: high

Output Level

Off

The ideal dialog

position

Move up to the ideal

dialog position

• “Dialogue Lift” can be adjusted only when the presence speakers

are available.

• You cannot move the dialog position lower than the default

setting.

Auto (Default) Automatically selects the most suitable decoder if a

flag for reproducing surround back channel is present,

and reproduces the signals in 6.1- or 7.1-channel.

q PLIIx Movie Always reproduces signals in 7.1-channel using the

Dolby Pro Logic IIx Movie decoder whether or not

surround back channel signals are contained. You can

select this parameter when two surround back

speakers are connected.

q PLIIx Music Always reproduces signals in 6.1- or 7.1-channel

using the Dolby Pro Logic IIx Music decoder whether

or not surround back channel signals are contained.

You can select this parameter when one or two

surround back speakers are connected.

EX/ES Automatically selects the most suitable decoder for

input signals whether or not the flag for reproducing

surround back channel is present, and always

reproduces signals in 6.1-channel.

Off Always reproduces original channels whether or not

the flag for reproducing surround back channel is

present.

1 : “Adaptive DRC” is also effective when you use headphones.

2 : AV5-6 or AUDIO1-2 are available when “Audio Return Channel” is on, and

the input source is used for “TV Audio Input.”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V3067 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V3067

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info