Bedienungsanleitung Yamaha RX-V3067 (Seite 101 von 166) (Englisch)

516915

101

Zoom out

Zoom in

Vorherige Seite

1/166

Nächste Seite

En 101

SETUP

Setting various functions (Setup menu)

Extra Bass

Allows the front channel low-frequency components to be

produced exclusively by the subwoofer, or by both the subwoofer

and the front speakers.

Distance

Adjusts the timing at which the speakers produce audio so that

sounds from the speakers reach the listening position at the same

time.

Selecting adjustment units

Use iCursor B / C to select the unit for distance (meters or

feet), and press iENTER.

Setting distances for each speaker

Use iCursor B / C to select the speaker you want to configure,

and press iENTER.

Then use iCursor D / E to set the distance from the speaker to

your listening position.

Level

Separately adjusts the volume of each speaker.

Use iCursor B / C to select the desired speaker, and press

iENTER.

Then use iCursor D / E to adjust the volume for the selected

speaker.

Parametric EQ

Adjusts sound quality of tone using a parametric equalizer.

PEQ Select

Select an equalizer type.

PEQ Data Copy

Select 1 of the 3 parametric equalizer types acquired with automatic

setup and manually copy that information to the manual adjustments.

Off (Default) Depending on the size of the front speakers, either the

front speakers or the subwoofer produce the front

channel low-frequency components.

On The subwoofer and the front speakers produce the

front channel low-frequency components.

When “Subwoofer 1” and “Subwoofer 2” are set to “None” or

“Front” is set to “Small,” “Extra Bass” is disabled.

Adjustable range 0.30 m to 24.00 m (1.0 ft. to 80.0 ft.)

Default setting 3.00 m (10.0 ft.)

Adjustment

increments

0.05 m (0.2 ft.)

Adjustable range -10.0 dB to +10.0 dB

Default setting 0.0 dB

Adjustment

increments

0.5 dB

You can also adjust the volume of each speaker by using

ALEVEL.

Press ALEVEL and use iCursor B / C to select the desired

speaker. Then use iCursor B / C to adjust the volume for the

selected speaker.

Manual Manually adjust equalizer sound.

Flat Adjust individual speakers to achieve the same

characteristics. Select this option if speakers offer the

same quality.

Front Adjust individual speakers to achieve the same

characteristics as the front left and right speakers.

Select this option if front left and right speakers offer

significantly greater quality than other speakers.

Natural Adjust all speakers to achieve a natural sound. Select

this if high-frequency sounds seem too strong when

“PEQ Select” is set to “Flat.”

Through (Default) Disable the equalizer.

Flat Manual Copy the “Flat” parametric equalizer information

acquired with automatic setup.

Front Manual Copy the “Front” parametric equalizer information

acquired with automatic setup.

Natural Manual Copy the “Natural” parametric equalizer information

acquired with automatic setup.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V3067 Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V3067

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info