516915
128
Zoom out
Zoom in
Vorherige Seite
1/166
Nächste Seite
SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
En 128
Remote sensor
Activate or deactivate the signal-receiving capability of
the remote control sensor on the front panel of this unit.
Avoiding crossing remote control
signals when using multiple
Yamaha receivers
The remote control of the unit can only receive signals
from a receiver which has an identical ID (remote
control ID). When using multiple Yamaha AV receivers,
you can set each remote control with a unique remote
control ID for its corresponding receiver.
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
control to operate 2 receivers.
ENTER
3
21
6
9
87
0
SETUP
4
5
SOURC
E
RECEIVER
AV
AUDIO
4
3
1
2
7
5
6
V-AUX
4
3
1
2
USB
NET
PH
O
N
O
TUNER
DOCK
T
U
N.
/C
H
[
A
]
[
B
]
v
i
l
B
ON (Default) Activate the signal-receiving capability of
the remote control sensor
OFF Deactivate the signal-receiving capability
of the remote control sensor
“ON” is recommended in most cases.
REMOTESENSOR

ON
ID1 (Default) Receives the remote control signals set in
ID1.
ID2 Receives the remote control signals set in
ID2.
ID1 is set for both remote control and receiver by
default. To avoid crossing remote control, change the
remote control ID for both remote control and
receiver.
REMOTECONAMP

ID1
To change the remote control ID
1
Press BSETUP.
2
Press iCursor B / C repeatedly to select
“PRESET” and press iENTER.
3
Press lRECEIVER A and press
iENTER.
4
Enter the desired remote control ID code.
To switch to ID1:
Enter “5019” using
vNumeric keys or
iCursor B / C / D / E.
To switch to ID2:
Enter “5020” using
vNumeric keys or
iCursor B / C / D / E.
5
Press iENTER to set the number.
“OK” appears in the display window if setting was
successful.
“NG” appears in the display window if the setting
was unsuccessful. In this case, start over from
step 4.
6
Press BSETUP again to exit from the
setup menu.
Perform each of the following steps within
30 seconds. Settings will be automatically stopped
if more than 30 seconds passes since the last
operation. To reset, repeat from step 1.
Returns to ID1 after the remote control code is
initialized (
p. 124).
128

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha RX-V3067 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha RX-V3067

Yamaha RX-V3067 Bedienungsanleitung - Deutsch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Deutsch - 8 seiten

Yamaha RX-V3067 Kurzanleitung - Englisch - 8 seiten

Yamaha RX-V3067 Kurzanleitung - Holländisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Holländisch - 166 seiten

Yamaha RX-V3067 Bedienungsanleitung - Französisch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Französisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Italienisch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Italienisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Spanisch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Spanisch - 8 seiten

Yamaha RX-V3067 Kurzanleitung - Schwedisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Schwedisch - 166 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info