Bedienungsanleitung Yamaha RX-V3067 (Seite 131 von 166) (Englisch)

516915

131

Zoom out

Zoom in

Vorherige Seite

1/166

Nächste Seite

SETUP

En 131

This unit supports the HDMI Control function, which allows you to

operate external components via HDMI. If devices that support

HDMI Control (e.g., Panasonic VIERA Link-compatible TVs,

DVD/Blu-ray Disc players, etc.) are connected J1, remote

controls for those devices can be used to perform the following

operations:

– Power synchronization (on/standby)

– Volume control, including Mute

– Changing the volume of the audio output signal device (either the

TV or this unit)

Connect the TV that supports the HDMI Control

function to this unit’s HDMI output jack.

Connect the BD/DVD player that supports the HDMI

Control function to this unit’s HDMI input jack.

Turn on the TV and this unit.

Refer to the TV’s instruction manual on how to operate external

components.

Set the TV and this unit’s HDMI Control function to

“On.”

Turn the TV off.

Other synchronized HDMI Control devices are turned off with the

TV. If they are not synchronized, unplug the power cable of the

TV.

Turn the TV on.

Confirm that this unit has turned on in conjunction with the TV. If

it is still off, turn it on manually.

Change the TV’s input setting to the input jack that

is connected to this unit (e.g., AV1).

If BD/DVD player that supports the HDMI Control

function are connected to this unit, turn them on.

Confirm that this unit is properly synchronized with

the TV through the following operations by using the

TV remote control.

• Power On/Off

• Volume Control

• Switching between audio output devices

Using the HDMI Control function

NOTE

The following is an example of how to connect this unit, a TV,

and a BD/DVD player. Follow the instructions in your TV and

BD/DVD player manuals, as well as the ones written below.

– Set the TV’s HDMI Control function to “On”

– Follow the AV amplifier connection instructions, and connect

this unit to the TV

HDMI

Control signal

(such as volume control)

Remote control of TV

This unit

HDMI connection

This unit Confirm that “HDMI Control” is set to “On”

(☞p. 106) and select the HDMI OUT jack connected

to the TV in “Control Select” (☞p. 106). J2

TV and BD/DVD

player

Check the instruction manuals for those devices.

This unit Confirm that the input source for the BD/DVD players

has been selected. If a different input source has been

selected, change it manually.

TV and BD/DVD

player

Confirm that the video signal from the player is being

properly received by the TV.

Operations 1-8 will not be required more than twice. However,

perform operations 1-8 again when switching the HDMI OUT

jack using Control Select.

If this unit is not synchronized to the TV’s power operations,

check that the HDMI Control function is set to “On” for both

devices.

If they will not properly synchronize, unplugging and re-

plugging the power cable of this unit and the TV may solve the

problem.

1 : We recommend that you use TVs and BD/DVD players from the same

manufacturer whenever possible.

2 : The default setting for the HDMI Control function is “Off.”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V3067 Seite 131

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V3067

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info