Bedienungsanleitung Yamaha RX-V3800 (Seite 43 von 165) (Englisch)

464156

Zoom out

Zoom in

Vorherige Seite

1/165

Nächste Seite

Playback

41 En

BASIC

OPERATION

English

1 Turn on the video monitor connected to this

unit.

• You can control this unit by using the graphical user

interface (GUI) screen. See page 44 for details.

• You can turn on or off the short message displays on the

video monitor. See page 87 for details.

2 Rotate the

INPUT selector (or set the

operation mode selector to

AMP and then

press one of the input selector buttons (1))

to select the desired input source.

The name of the currently selected input source

appears in the front panel display and in the short

message display for a few seconds.

3 Start playback on the selected source

component or select a broadcast station.

• Refer to the instruction manuals for the source

component.

• See page 53 for details about FM/AM tuning

instructions.

• See page 59 for details about the iPod operation

with this unit.

• See page 61 for details about playback of Internet

Radio programs and the music contents in the PC

or USB memory devices.

Rotate

VOLUME

(or press

VOLUME +/–

)

to adjust the volume to the desired output level.

Control range: Mute, –80.0 dB (minimum) to

+16.5 dB (maximum)

See page 52 to adjust the level of each speaker.

5 Rotate the

PROGRAM selector on the

front panel (or press one of the sound field

program selector buttons (O) repeatedly) to

select the desired sound field program.

The name of the selected sound field program appears

in the front panel display and in the short message

display. See page 45 for details about sound field

programs.

Sound field programs cannot be selected when the

component connected to the MULTI CH INPUT jacks is

selected as the input source (see page 42).

• Choose a sound field program based on your listening

preference, not merely on the name of the program.

• When you select an input source, this unit automatically

selects the last sound field program used with the

corresponding input source.

Playback

Caution

Extreme caution should be exercised when you play

back CDs encoded in DTS. If you play back a CD

encoded in DTS on a DTS-incompatible CD player,

you will only hear some unwanted noise that may

damage your speakers. Check whether your CD player

supports CDs encoded in DTS. Also, check the sound

output level of your CD player before you play back a

CD encoded in DTS.

To play DTS-encoded CDs when using a digital audio

connection, set “Decoder Mode” in “Input Select” to “DTS”

before playback (see page 79).

Before performing the following operations, set the operation

mode selector on the remote control to

AMP.

Basic procedure

CD-R

PHONO

MULTI CH

TUNER

MD/TAPE

BD/HD DVD

DVD

DVR

DTV/CBL

VCR

V-AUX

NET/USB

DVD

Currently selected input source

Available input sources

Note

Movie

Sci-Fi

Currently selected sound field program

Currently selected sound field program category

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V3800 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V3800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info