Bedienungsanleitung Yamaha RX-V3800 (Seite 58 von 165) (Englisch)

464156

Zoom out

Zoom in

Vorherige Seite

1/165

Nächste Seite

Radio Data System tuning (Europe model only)

56 En

Radio Data System is a data transmission system used by FM stations in many countries. This unit can receive various

Radio Data System data such as PS (program service), PTY (program type), RT (radio text), CT (clock time), and EON

(enhanced other networks) when receiving Radio Data System broadcasting stations.

Use this feature to display the 4 types of the Radio Data

System information: PS (program service), PTY (program

type), RT (radio text) and CT (clock time). The

corresponding indicators light up in the front panel

display.

• You can select one of the Radio Data System display modes

only when the corresponding Radio Data System indicator

lights up in the front panel display. It may take a while for this

unit to receive all of the Radio Data System data from the

station.

• You can select only the available Radio Data System display

modes being offered by the station.

• If the signals being received are not strong enough, this unit

may not be able to utilize the Radio Data System data. In

particular, the “RT” mode requires a large amount of data and

may not be available even when the other Radio Data System

display modes are available.

• In case of poor reception conditions, press LTUNING MODE

on the front panel so that the AUTO indicator disappears from

the front panel display.

• If the signal strength is weakened by external interference while

this unit is receiving the Radio Data System data, the reception

may be cut off unexpectedly and “...WAIT” appears in the front

panel display.

• When the “RT” mode is selected, this unit can display the

program information by a maximum of 64 alphanumeric

characters, including the umlaut symbol. Unavailable characters

are displayed with the “_” (underscore).

• If the reception is cut off when the “CT” mode is selected, “CT

WAIT” appears in the front panel display.

1 Tune into the desired Radio Data System

broadcasting station.

• We recommend using the automatic preset tuning

to tune into the Radio Data System broadcasting

stations (see page 54).

• You can also use PTY SEEK mode to tune into the

desired Radio Data System broadcasting station

from the preset ones.

2 Press 7 FREQ/TEXT on the remote control

repeatedly to select the desired Radio Data

System display mode.

• Select “PS” to display the name of the Radio Data

System program currently being received.

• Select “PTY” to display the type of the Radio Data

System program currently being received.

• Select “RT” to display the information on the

Radio Data System program currently being

received.

• Select “CT” to display the current time.

Radio Data System tuning (Europe model only)

Displaying the Radio Data System

information

Notes

CTRTPTYPS

Frequency display

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V3800 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V3800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info