464175
60
Zoom out
Zoom in
Vorherige Seite
1/91
Nächste Seite
En 60
SETUP
Setting sound field program parameters
CINEMA DSP parameters
Selects a surround decoder to be used with a sound field program
in the MOVIE category. J1
Change the effect level (level of the sound field effect to be added).
You can adjust the level of the sound field effect while checking the
sound effect.
Parameters usable in certain sound field
programs
2ch Stereo only
Automatically bypasses the DSP circuit and tone control circuit
depending on the condition of tone control etc., when an analog
sound source is played back. You can enjoy a higher quality sound.
7ch Stereo only
Adjusts the center channel volume. J2
Adjusts the volume of the surround L channel. J2
Adjusts the volume of the surround R channel. J2
Adjusts the volume of the surround back channel. J2
Straight Enhancer/7ch Enhancer only
Adjusts the effect level of the compressed music enhancer mode.
<Dolby PLIIx Movie>
<Neo:6 Cinema>
Dolby PLIIx Movie
(Dolby PLII Movie)
Selects the Dolby Pro Logic IIx Movie (or
Dolby Pro Logic II Movie) decoder.
Neo:6 Cinema Selects the Neo:6 (Cinema) decoder.
DSP Level
Adjustable range -6 dB to 0 dB to +3 dB
Default setting 0 dB
Adjust “DSP Level” as follows:
The effect sound is too soft.
There are no differences between effects of the sound field
programs.
Increase the effect level.
The sound is dull.
The sound field effect is added too much.
Reduce the effect level.
Direct
Auto (Default) Outputs sound by bypassing the DSP circuit and tone
control circuit when both tone controls of “Bass” and
“Treble” are set to 0dB.
Off Does not bypass the DSP circuit and tone control
circuit.
CT Level
Adjustable range 0 to 100%
Default setting 100%
SL Level
Adjustable range 0 to 100%
Default setting 100%
SR Level
Adjustable range 0 to 100%
Default setting 100%
SB Level
Adjustable range 0 to 100%
Default setting 35% (7.1-channel configuration)
50% (6.1-channel configuration)
EFCT LVL
High (Default) Standard effect.
Low Sets when the high-frequency signals of the source are
emphasized excessively.
J
1 : Surround decoders cannot be changed when used with the following MOVIE
sound field programs.
Mono Movie
Sports
Action Game
Roleplaying Game
J
2 : Not displayed when speakers are set to be inactive.
60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

yamaha-rx-v467

Suche zurücksetzen

  • wie empfange ich bildsignale des verstärkers auf meinem fehrnseher.
    Eingereicht am 28-9-2017 15:58

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha RX-V467 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha RX-V467

Yamaha RX-V467 Kurzanleitung - Deutsch - 8 seiten

Yamaha RX-V467 Bedienungsanleitung - Deutsch - 91 seiten

Yamaha RX-V467 Kurzanleitung - Englisch - 8 seiten

Yamaha RX-V467 Kurzanleitung - Holländisch - 8 seiten

Yamaha RX-V467 Bedienungsanleitung - Holländisch - 83 seiten

Yamaha RX-V467 Bedienungsanleitung - Französisch - 91 seiten

Yamaha RX-V467 Kurzanleitung - Französisch - 8 seiten

Yamaha RX-V467 Bedienungsanleitung - Italienisch - 91 seiten

Yamaha RX-V467 Kurzanleitung - Italienisch - 8 seiten

Yamaha RX-V467 Bedienungsanleitung - Spanisch - 91 seiten

Yamaha RX-V467 Kurzanleitung - Spanisch - 8 seiten

Yamaha RX-V467 Kurzanleitung - Schwedisch - 8 seiten

Yamaha RX-V467 Bedienungsanleitung - Schwedisch - 91 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info