Bedienungsanleitung Yamaha RX-V565 (Seite 26 von 332) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch)

464173

Zoom out

Zoom in

Vorherige Seite

1/332

Nächste Seite

22 En

Playback

2 Press gInput selection keys on the

remote control for the input source whose

remote control code was registered in step 1

for about 3 seconds while pressing down

kSCENE key whose assignment you want

to change.

The external component can now be controlled

remotely just by selecting a scene.

1 Press qMUTE on the remote control to mute

the audio output.

The MUTE indicator on the front panel display

flashes while audio output is muted.

2 Press qMUTE again to resume audio

output.

You can adjust the balance of the high frequency range

(Treble) and low frequency range (Bass) of sounds output

from the front left and right speakers to obtain desired tone.

• The tone control of the speakers or headphones can be set separately. Set

the headphone tone control with the headphones connected.

1 Press JTONE CONTROL on the front panel

repeatedly to select “Treble” or “Bass.”

The current setting is displayed on the front panel

display.

2 Adjust the frequency range using

KPROGRAM l / h.

Control range: –10.0 dB to +10.0 dB

The display returns the previous screen soon after you

release the key.

Notes

• The tone control settings are not effective during playback in direct

mode.

• If you set the balance extremely off, sounds may not match those from

other channels well.

Use Direct mode to enjoy the pure high fidelity sound of

the selected source. When Direct mode is activated, this

unit plays back the selected source with the least circuitry.

Press MDIRECT (or jDIRECT) to turn the

Direct mode on or off.

The following features are disabled in Direct mode.

– sound field program, tone control

– display and operation of the option menu and setup

• While direct mode is on, the front panel display screen becomes dim.

When setting it back off, the brightness of the screen returns to the

previous setting.

The sleep timer is useful if you want to go to sleep while

this unit is playing or recording a source.

Press eSLEEP repeatedly to set the amount of

time.

Each time you press eSLEEP, the front panel display

changes as shown below.

When the sleep timer is set, the SLEEP indicator on the

front panel display lights up.

Press eSLEEP on the remote control repeatedly until

“Sleep Off” appears on the front panel display.

Plug your headphones in the BPHONES jack on

the front panel.

When you select a sound field program while using the

headphones, the mode is automatically set to SILENT

CINEMA mode.

Notes

• When you connect headphones, no signals are output at the speaker

terminals.

• When multi-channel signals are processed, sounds in all channels are

divided to left and right channels.

Muting audio output temporarily

(MUTE)

Adjusting high/low frequency sound

(tone control)

Treble

0.0dB

Enjoying pure hi-fi sound

Using the sleep timer

Using your headphones

Sleep 120min. Sleep 90min.

Sleep 60min.Sleep 30min.Sleep Off

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V565 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V565

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info