Bedienungsanleitung Yamaha RX-V567 (Seite 36 von 84) (Englisch)

464174

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

En 36

PLAYBACK

FM/AM tuning

Use eTUNING H / I to set a frequency to

receive.

TUNING H

Increases the frequency. Press and hold this key for

longer than a second to search automatically for a station

on a higher frequency than the current one. J1

TUNING I

Decreases the frequency. Press and hold this key for

longer than a second to search automatically for a station

on a lower frequency than the current one. J1

Registering and recalling a

frequency (Preset tuning)

You can register up to 40 FM/AM stations as preset

stations. There are two methods of presetting stations,

“Auto Preset” and “Manual Preset.” Use one of these

methods to register stations.

■

Presetting FM stations

automatically (Auto Preset)

The tuner detects FM stations with strong signals and

registers up to 40 automatically.

Press dTUNER to switch to the tuner input.

Press qOPTION to display the Option

menu. J3

Use jCursor B / C to select “Auto Preset.”

TUNER

eTUNING H / I

jCursor B / C / D / E

jENTER

lNumeric keys

qOPTION

OPTION

TUNER

TUNING

ENTER

7 856

1234

ENT

EIVER

ETU

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

TERE

ADI

V V

P-

PLAY

SOURCE

DOCK

[

]

[

]

■ Entering a frequency number

In normal tuning mode, use the lNumeric keys on

the remote control to enter a frequency. Leave the

decimal point out when entering a number. J2

For example, enter as follows to select a station on

98.50MHz.

STEREO

TUNED

SL SR

SBL SBR

FM98.50MHz

STEREO

TUNED

VOL.

Lights up when receiving

a broadcast from a station

Lights up when receiving

a stereo broadcast

9 8

■ When signal reception is poor

When you are receiving an FM broadcast and cannot

obtain a stable stereo broadcast, you can force this

unit to receive in a monaural mode.

Press dTUNER to switch to the tuner

input.

Press qOPTION to display the Option

menu. J3

Use jCursor B / C to select “FM Mode.”

Press jENTER and use jCursor D / E to

select “Mono.”

When setting is completed, press

qOPTION to close the Option menu.

To return this unit to its original settings, use the

same procedure and select “Stereo” in step 4.

FMMode

OPTION

VOL.

SBL SBR

FMMode:Mono

9850

VOL.

AM stations cannot be automatically registered. Use

manual station preset (☞

p. 37).

SL SR

Auto Preset

OPTION

VOL.

SBL SBR

Continues to the

1 : When searching for a station, release the key once the search has

started.

2 : “Wrong Station!” appears on the front panel display when you

enter a frequency that is out of receivable range. Make sure that

the frequency entered is correct.

3 : Refer to the “Configuring the settings specific for each input

source (Option menu)” (☞

p. 45) for details on the Option menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V567 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V567

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info