Bedienungsanleitung Yamaha RX-V595a (Seite 21 von 63) (Englisch, Französisch)

458065

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

English

ADJUSTMENTS BEFORE USING THIS UNIT

SELECTING THE OUTPUT MODES

This unit provides you with the following five functions to determine the method of distributing output signals to speakers suitable for

your audio system. When speaker connections have all been completed, select the proper setting for each function to make the

best use of your speaker system. (See “ADJUSTMENTS IN THE ‘SET MENU’ MODE” on page 41.)

CNTR (CENTER SPEAKER)

2. REAR (REAR SPEAKERS) 3. MAIN (MAIN SPEAKERS)

4. BASS (LFE/BASS OUT) 5. M.LVL (MAIN LEVEL)

DESCRIPTION OF EACH FUNCTION

CNTR (CENTER SPEAKER)

Choices: LARGE/SMALL/NONE

Preset position: LARGE

LARGE: Select this position when your center speaker is

approximately the same size as the main speakers.

SMALL: Select this position when you use a center speaker

that is smaller than the main speakers.

In this position, low bass signals (below 90 Hz) on the

center channel are output from the main speakers (or

the SUBWOOFER OUTPUT terminal if the SMALL

position is selected for “MAIN” and the SW position is

selected for “BASS”).

NONE: Select this position when you do not have a center

speaker (four speaker system). The center channel

sound will be output from the left and right main

speakers.

REAR (REAR SPEAKERS)

Choices: LARGE/SMALL

Preset position: LARGE

LARGE: Select this position if your rear speakers have high

ability for bass reproduction, or if a subwoofer is

connected in parallel to the rear speaker.

In this position, full-range signals are output from the

rear speakers.

SMALL: Select this position if your rear speakers do not have

high ability for bass reproduction.

In this position, low bass signals (below 90 Hz) on

the rear channels are output from the SUBWOOFER

OUTPUT terminal (or the main speakers if the MAIN

position is selected for “BASS”).

MAIN (MAIN SPEAKERS)

Choices: LARGE/SMALL

Preset position: LARGE

LARGE: Select this position if your main speakers have high

ability for bass reproduction.

In this position, full-range signals present on the

main channels are output from the main speakers.

SMALL: Select this position if your main speakers do not

have high ability for bass reproduction. However, if

your system does not include a subwoofer, do not

select this position.

In this position, low bass signals (below 90 Hz) on

the main channels are output from the

SUBWOOFER OUTPUT terminal if the SW or BOTH

position is selected for “BASS”.

BASS (LFE/BASS OUT)

Choices: SW/MAIN/BOTH

Preset position: SW

MAIN: Select this position if your system does not include a

subwoofer.

In this position, full-range signals present on the

main channels, signals from the LFE channel and

other low bass signals that are distributed from other

channels are output from the main speakers.

SW/BOTH:

Select either the SW or BOTH position if your

system includes a subwoofer.

In either position, signals on the LFE channel and

other low bass signals that are distributed from other

channels are output from the SUBWOOFER

OUTPUT terminal.

When the LARGE position is selected for “MAIN”, in

the SW position, no signal is distributed from the

main channels to the SUBWOOFER OUTPUT

terminal; however, in the BOTH position, low bass

signals from the main channels are output to both

the main speakers and the SUBWOOFER OUTPUT

terminal.

M.LVL (MAIN LEVEL)

Choices: NRML (NORMAL)/–10 dB

Preset position: NRML (NORMAL)

NRML (NORMAL):

Normally select this position.

–10 dB: Select this position if the sound output from the main

speakers is too loud and cannot be balanced with

the sound output from the center and rear speakers.

In this position, the sound output from the main

speakers is attenuated.

Note

The settings of “CNTR”, “REAR”, “MAIN” and “BASS” have no

effect on the signals input to the EXTERNAL DECODER

INPUT terminals on the rear of this unit.

01RX-V595a-e/f2 6/24/99, 11:43 AM21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V595a Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info