Bedienungsanleitung Yamaha RX-V595aRDS (Seite 26 von 60) (Englisch)

549977

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Notes on using INPUT

• The audio source selected by INPUT will not be played if the

“TAPE/MD MON” indicator lights up or if “EXT. DECDR” is

displayed.

• If you select a video source by INPUT without canceling the

selection of TAPE/MD MON / EXT. DECODER on the front

panel (or TAPE/MD or EXT. DEC. on the remote control), the

play back result will be a video image from the video source

and the sound from the audio source selected by TAPE/MD

MON / EXT. DECODER on the front panel (or TAPE/MD or

EXT. DEC. on the remote control).

• If an audio source is selected by INPUT while watching a

video source, the selected audio source will be played, but

the video image will not be interrupted.

• When you select an input source by INPUT, the DSP

program (or no DSP program) that was being used when the

same input source was selected the last time will be auto-

matically recalled.

• If “DATA ERR” appears on the display while playing a CD or

LD encoded with DTS, stop playback and turn the player off

and then on again.

Switching the input mode

(for DVD/LD and TV/DBS)

This unit allows you to switch the input mode for sources that

send two or more types of signal to this unit.

The following three input modes are provided.

AUTO

This mode is automatically selected when you turn on the

power of this unit.

In this mode, the input signal is automatically selected in the

following order of priority:

1. Digital signal encoded with Dolby Digital or DTS, or normal

digital input signal (PCM)

2. Analog input signal (ANALOG)

* For a DVD/LD source, if digital signals are input from both the

OPTICAL and COAXIAL terminals, the digital signal from the

COAXIAL terminal is selected.

DTS

In this mode, only a digital input signal encoded with DTS is

selected, even though other signals are input at the same time.

ANALOG

In this mode, only an analog input signal is selected, even

though digital signals are input at the same time.

Select this mode when you want to use an analog input signal

instead of digital input signals.

Notes on input mode selection

• The input mode for a TV/DBS source is selected with the

function “INPUT” in the SET MENU mode. (See page 43 for

details.)

• Set the input mode to AUTO to play a DVD/LD source

encoded with Dolby Digital.

• Set the input mode to ANALOG to play a normal 2-channel

source with a Dolby Surround program.

• The sound output may be interrupted in some LD and DVD

players in the following situation:

The input mode is set to AUTO. A search is made while

playing the disc encoded with Dolby Digital or DTS, and then

disc playing is restored. The sound output is interrupted for a

moment because the digital input signal was selected again.

• The input mode cannot be changed for the PHONO, TUNER,

TAPE/MD, CD, VCR and VIDEO AUX sources because only

analog signals are used.

• The present input mode appears on the display when the

input source is changed to DVD/LD or TV/DBS, or the input

mode is changed.

Notes on playing a source encoded with DTS

If you play a CD or LD encoded with DTS while the AUTO

mode is selected, there will be a short noise at first while the

unit identifies the DTS signal and activates the DTS decoder.

This is not a malfunction, and can be avoided by setting the

input mode to DTS beforehand. In addition, If you continue

to play a CD or LD encoded with DTS with the input mode

setting left at AUTO, this unit automatically switches to the

“DTS-decoding” mode to prevent noise from being gener-

ated during future operation. (The red “dts” indicator lights

up on the display.)

No sound will be heard if a normal PCM CD or LD is played

in this mode. (The red “dts” indicator will flash.) To play a

normal disk, return the input mode from DTS to AUTO.

01RX-V595aRDS-3 6/24/99, 11:00 AM26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V595aRDS Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info