Bedienungsanleitung Yamaha RX-V595aRDS (Seite 43 von 60) (Englisch)

549977

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

English

C.DELAY [Adjusting the delay of

center sounds (dialog, etc.)]

Control range: 0 ms to 5 ms (in 1 ms steps)

Preset value: 0 ms

* This adjustment is effective only when Dolby Digital or DTS is

being decoded and the signals of the selected source

encoded with Dolby Digital or DTS contain center-channel

signals.

This adjusts the delay between the main sound (on the main

channels) and dialog, etc. (on the center channel).

The larger the value, the later the dialog, etc. is generated.

This is for making sounds from the left main, center and right

main speakers reach your listening position at the same time.

This is achieved by delaying the sound from the center speaker

if the distance from the center speaker to your listening position

is shorter than the distance from the left or right main speaker

to your listening position.

GUARD (Memory guard)

Choices: ON/OFF

Preset position: OFF

If you wish to prevent accidental alterations to SET MENU and

other adjustments on this unit, select ON. The following

functions on this unit can be locked by this operation:

• Other functions in the SET MENU mode

• Functions in the TIME/LEVEL mode

• Functions when using TEST

INPUT

(Selecting the mode of the TV/DBS input)

Choices: AUTO/LAST

Preset position: AUTO

You can designate the input mode that is automatically selected

when the power of this unit is switched on for only the sources

connected to the TV/DBS input terminals of this unit.

AUTO: In this position, the AUTO input mode is always

selected when the power for this unit is switched on.

LAST: In this position, the input mode you selected last time

is memorized and will not be changed when the

power is switched on again.

* See page 26 for details on switching the input mode.

Adjustment method

Adjustments should be made while watching the information on

this unit’s display.

When adjusting with the remote control, set the SELECTOR

DIAL to the AMP/TUN or DSP position on the remote control.

Press SET MENU once or more so that the function which you

want to change appears on the display.

Front panel Remote control

* After pressing SET MENU once on the remote control, you

can also select the title by pressing

. (Pressing goes back

one selection.)

Press + or – to select any desired position or to edit parameters

of the chosen function.

Front panel Remote control

Repeat these steps to change or adjust the settings of any

other function.

Memory back-up

The memory back-up circuit prevents the stored data from

being lost when this unit is set in the standby mode. If,

however, the power plug is disconnected from the AC outlet or

the power is cut due to temporary power failure for more than

one week, the settings of the SET MENU mode will automati-

cally return to the factory settings. If so, they can be re-set by

simply following the procedure above.

01RX-V595aRDS-5 6/24/99, 11:01 AM43

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V595aRDS Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info