Bedienungsanleitung Yamaha RX-V595RDS (Seite 48 von 67) (Englisch)

549978

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

You can use this remote control transmitter to control not only this unit but also other components connected to it. This is factory

set to control this unit and most YAMAHA audio components. To control other brands of components, you must preset the remote

control transmitter with the manufacturer’s codes listed on pages 397 to 402.

2 Press the desired operation button.

Note: Press the button with the remote control transmitter

aimed at the front panel.

REMOTE CONTROL TRANSMITTER

Basic Operations

1 Select the component that you want to control by turning

the SELECTOR DIAL.

Note: Turn the SELECTOR DIAL until it stops with a click.

Components which can be controlled

There are nine positions that you can select to control connected components with this remote control transmitter. When turning

the SELECTOR DIAL, the position changes as follows:

SELECTOR

DIAL

Notes

1. The shaded positions in the diagram above indicate that you can preset the code for the manufacturer of your component.

Note that you can preset only one code for one position. For details, see “SETUP CODES” on page 53.

2. The DVD/LD and DVD MENU positions

• Be sure that the SELECTOR DIAL is set to the DVD/LD position when presetting the code for a DVD or an LD player. The

code that you preset to the DVD/LD position is also preset to the DVD MENU position simultaneously. You cannot preset the

code for a DVD player when the SELECTOR DIAL is set to the DVD MENU position.

• DVD MENU operations cannot be performed for some DVD players.

3. When using a second (and third) VCR (For details, see “To use a second (and third) VCR” on page 53.)

• If you are not using a CBL/DBS (cable TV or DBS tuner), the second (or third) VCR can be preset using the CBL/DBS

position.

• If you are not using a DVD player, the second (or third) VCR can be preset using the DVD MENU position. Note that in this

case you must preset a code for an LD player to the DVD/LD position even if an LD player is not used.

DVD/LD & DVD MENU:

An LD player can be controlled using the DVD/LD position.

A DVD player can be controlled using the DVD/LD and DVD

MENU positions. When using the YAMAHA DVD player

(DVD-1000 or DVD-S700), be sure to preset the code number

“4490”.

AMP/TUN:

You can perform basic opera-

tions of this unit with the

SELECTOR DIAL set to this

position.

TAPE/MD:

The code for a YAMAHA tape deck is preset.

(Be sure to preset the proper code when operating a YAMAHA

MD recorder.)

CD:

The code for a YAMAHA CD player is preset.

DSP:

This unit can be controlled and DSP programs can be selected

directly.

VCR:

A VCR can be controlled.

CBL/DBS:

A cable television or

DBS tuner can be

controlled.

TV:

A television can be

controlled.

Indicator

The indicator will flash when the button

is pressed.

The component name is

displayed in this window.

01RX-V595RDS-6 6/23/99, 1:13 PM48

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V595RDS Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info