Bedienungsanleitung Yamaha RX-V659 (Seite 83 von 128) (Englisch)

464162

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

SET MENU

ADVANCED

OPERATION

English

Bass out LFE/BASS OUT

Use this feature to select the speakers that output the LFE

(low-frequency effect) and the low-frequency signals.

Choices: SWFR, FRNT, BOTH

• Select “SWFR” (subwoofer) if you connected a

subwoofer. The LFE signals as well as the low-

frequency signals of other speakers set to “SML” (or

“SMALL”) or to “NONE” are directed to the

subwoofer.

• Select “FRNT” (front) if you did not connect a

subwoofer. The LFE signals, the low-frequency signals

of the front left and right channels, and the low-

frequency signals of other speakers set to “SML” (or

“SMALL”) or to “NONE” are all directed to the front

left and right speakers regardless of the “FRONT SP”

setting (see page 79).

• Select “BOTH” (both) if you connected a subwoofer.

The low-frequency signals of any source are output

from the subwoofer. The LFE signals as well as the

low-frequency signals of other speakers set to “SML”

(or “SMALL”) or to “NONE” are directed to the

subwoofer. The low-frequency signals of the front left

and right channels are directed to the front left and

right speakers and the subwoofer regardless of the

“FRONT SP” setting (see page 79).

Crossover CROSS OVER

Use this feature to select a crossover frequency of all the

speakers set to “SML” (or “SMALL”) or to “NONE” in

“SPEAKER SET” (see pages 79 and 80). All frequencies

below the selected frequency will be sent to the subwoofer

or to the speakers set to “LRG” (or “LARGE”) in

“SPEAKER SET” (see pages 79 and 80).

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,

120Hz, 160Hz, 200Hz

Subwoofer phase SUBWOOFER PHASE

Use this feature to switch the phase of your subwoofer if

bass sounds are lacking or unclear.

Choices: NORMAL, REVERSE

• Select “NORMAL” if you do not want to reverse the

phase of your subwoofer.

• Select “REVERSE” to reverse the phase of your

subwoofer.

Presence/Surround back channel priority

PRIORITY

Use this feature to prioritize either the presence or the

surround back speakers when playing sources that contain

surround back channel signals using the CINEMA DSP

sound field programs.

Choices: PRch, SBch

• Select “PRch” to use the presence speakers even when

surround back channel signals are input. The signals

for the surround back channel will be output from the

surround speakers.

• Select “SBch” to use the surround back speakers when

a surround back channel signals is detected in a

CINEMA DSP program. The presence channel signals

are output from the front speakers.

SWFRFRNT>BOTH

LFE/BASS OUT

FREQ;;;80Hz

CROSS OVER

>NORMALREVERSE

02ASUBWOOFER PHASE

PRch >SBch

PRIORITY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V659 Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V659

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info