Bedienungsanleitung Yamaha RX-V740 (Seite 45 von 68) (Englisch)

559127

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

English

ADVANCED

OPERATION

■ 1B MAIN (main speaker mode)

Choices: LARGE, SMALL

LARGE

Select this if you have large main speakers. The unit

directs the entire range of the main left and right channel

signals to the main left and right speakers.

SMALL

Select this if you have small main speakers. The unit

directs the low-frequency signals (90 Hz and below) of

the main channel to the speakers selected with “1E

BASS”.

■ 1C REAR LR (rear speaker mode)

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have large rear left and right speakers or

if a rear subwoofer is connected to the rear speakers. The

entire range of the rear channel signal is directed to the

rear left and right speakers.

SML

Select this if you have small rear left and right speakers.

The low-frequency signals (90 Hz and below) of the rear

channel are directed to the speakers selected with “1E

BASS”.

NON

Select this if you do not have rear speakers.

• This unit is set in the virtual CINEMA DSP mode when you

select NON for “1C REAR LR”. In this case, the rear center

speaker will automatically be set to NON and the “1D REAR

CT” item will be skipped.

■ 1D REAR CT (rear center speaker mode)

If you add a rear center speaker to your speaker

configuration, this unit can provide more realistic front-

to-back transitions.

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have a large rear center speaker. The

unit directs the entire range of the rear center channel

signal to the rear center speaker.

SML

Select this if you have a small rear center speaker. The

unit directs the low-frequency signals (90 Hz and below)

of the rear center channel to the speakers selected with

“1E BASS”.

NON

Select this if you do not have a rear center speaker. The

unit directs all of the rear center channel signal to the rear

left and right speakers.

■ 1E BASS (bass out mode)

LFE signals carry low-frequency effects when this unit

decodes a Dolby Digital or DTS signal. Low-frequency

signals are defined as 90 Hz and below. The Low-

frequency signals can be directed to both main left and

right speakers, and to the subwoofer (subwoofer can be

used for both stereo reproduction and the DSP program).

Choices: SWFR (subwoofer), MAIN, BOTH

SWFR

Select this if you use a subwoofer. The unit directs the

LFE signals to the subwoofer.

MAIN

Select this if you do not use a subwoofer. The unit directs

LFE signals to the main speakers.

BOTH

The unit directs LFE signals to the subwoofer. Low-

frequency signals designated to the main channels in

accordance with other speaker mode settings are directed

to both main speakers and the subwoofer.

Note

• When you select MAIN for “1E BASS”, the unit directs the

low-frequency signals (90 Hz and below) of the main channel

to the main speakers even if you select SMALL for the main

speaker mode.

SET MENU

0108RX-V740_41-47_EN-GB.p65 03.2.12, 4:28 PM43

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V740 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V740

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info