39
English
Tuning
BASIC OPERATION
1 Select “TUNER” as the input source.
2 Select the reception band. “FM” or “AM” will be
illuminated.
3
4 Tune to the desired station manually.
* Hold down the button to continue the tuning search.
1 Select “TUNER” as the input source.
2 Select the reception band. “FM” or “AM” will be
illuminated.
3
4 Press the “UP” side once to tune in to a higher
frequency.
Press the “DOWN” side once to tune in to a lower
frequency.
* Press the button again if the tuning search does not stop
at the correct station.
* Use manual tuning if the tuning search does not stop at
the correct station because the signals are weak.
Quick automatic-search tuning (automatic tuning) is effective when the station signals are strong with no interference. However,
manual tuning can be used during less-than-ideal conditions.
Notes
●
Manually selecting an FM station will automatically change
the reception to monaural to increase the signal quality.
●
When tuned in to a station, the frequency of the received
station is shown on the display. If an RDS station that
employs PS data service is received, the frequency is then
replaced by the station name. Refer to page 45 for details.
Ⅵ Automatic tuning Ⅵ Manual tuning
