50
Ⅵ To enjoy a video source encoded
with Dolby Surround, Dolby Digital
or DTS
When you select the program No. 1, 2 or 3, and the input
signal of the source is 2-channel stereo, Dolby Surround is
decoded. When some program is selected and the input signal of
the source is encoded with Dolby Digital, Dolby Digital is
automatically decoded.
When some program is selected and the input signal of the
source is encoded with DTS, DTS is automatically decoded.
The following indicators on the display panel show you what
sound processing is being made.
1 Lights up when a DVD source encoded with DTS is played
back and DTS is decoded.
2 Lights up when an LD source or a CD source encoded with
DTS is played back and DTS is decoded.
3 Lights up when Dolby Digital is being decoded and the
signals of selected source encoded with Dolby Digital is
not in 2-channels.
4 Lights up when Dolby Surround is being decoded.
5 Lights up when Digital Sound Field Processor is turned
on.
The display panel or the monitor screen will show the selected
subprogram according to the type of the decoding.
Notes
●
Dolby Digital will not be decoded if the source that is not
encoded with Dolby Digital.
DTS will not be decoded if the source that is not encoded
with DTS.
●
If the input signals of source encoded with Dolby Digital
are in 2-channels only, the sound processing for them is
similar to that for analog or PCM audio signals.
Note
If you change the LD (or CD) being played back with DTS
decoded to another disc not encoded with DTS when the red
“dts” indicator is illuminated, playing back the newly selected
disc will output no sound. In this state, the red “dts” indicator
flashes to show that this unit is locked in the DTS-decoding
mode.
To play back the disc normally, change the current DTS-
decoding mode to another mode by pressing an input selector
key on the remote controller or the INPUT MODE button on
the front panel so that the red “dts” indicator turns off.
Ⅵ To cancel the effect sound
The EFFECT button on the front panel or the EFCT ON/OFF key
on the remote controller make it simple to compare the normal
stereo sound with the fully processed effect sound.
To cancel the effect sound and monitor only the main sound,
press the EFCT ON/OFF key or the EFFECT button. Press the
EFCT ON/OFF key or the EFFECT button a second time to
restore the effect sound.
Notes
●
If the effect sound is canceled when signals encoded with
Dolby Digital or DTS are input to this unit, signals of all
channels are mixed and are output from the main speakers.
●
If the EFFECT button or the EFCT ON/OFF key is pressed to
turn effect sounds off when Dolby Digital or DTS is decoded, it
may happen that sound is output faintly or not output normally
depending on a source. In that case, press the EFFECT
button or the EFCT ON/OFF key to turn effect sounds ON, or
use input signals not encoded with Dolby Digital or DTS.
