Bedienungsanleitung Yamaha RX-V800RDS (Seite 27 von 528) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

559136

Zoom out

Zoom in

Vorherige Seite

1/528

Nächste Seite

English

INTRODUCTION

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

APPENDIX

BASIC PLAYBACK

6CH INPUT

PROGRAM

DIGITAL

DTS MOVIE THEATER 1

DOLBY DIGITAL

PRO LOGIC ENTERTAINMENT

DSP

6.1/ES

PCM

PRO LOGIC

D-TV/LD

CBL/SAT

VCR 1

VCR2/DVR

V-AUX

DVD

MD/TAPE

CD-R

TUNER

PHONO

VIRTUAL

PTY

HOLD

EON

STEREO

AUTO

NEWS INFO AFFAIRS SPORT

MEMORY TUNED

ZONE 2

VOLUME

SLEEP

To select a source connected to the 6CH INPUT

jacks

Press 6CH INPUT until “6CH INPUT” appears on the

front panel display and on the video monitor.

Front panel

Remote control

Notes

• If “6CH INPUT” is shown on the front panel display and on

the video monitor, no other source can be played. To select

another input source with INPUT l / h (or the input selector

buttons), press 6CH INPUT to turn off “6CH INPUT” from the

front panel display and the video monitor.

• If you want to enjoy an audio source connected to the 6CH

INPUT jacks together with a video source, first select the video

source and then press 6CH INPUT.

4 Start playback (or select a broadcast station)

on the source component.

Refer to the operation instructions for the

component.

5 Adjust the volume to the desired output

level.

If desired, use BASS, TREBLE and BASS

EXTENSION etc. These controls are only effective

for sound from the main speakers.

Front panel

Note

• If the component connected to the VCR 1 OUT, VCR 2/DVR

OUT, CD-R OUT and MD/TAPE OUT jacks is turned off, the

reproduced sound may be distorted or the volume may be

lowered. In these cases, turn on the component.

6 Use the digital sound field processor.

See page 28.

Front panel

Remote control

■ To mute the sound

Press MUTE on the

remote control.

To restore the audio output to

the previous volume level,

press MUTE again.

• You can also cancel mute to press any operation buttons such as

VOLUME +/–.

• During muting, “MUTE ON” appears on the front panel

display and on the video monitor.

■ When you have finished using

this unit

Press STANDBY/ON (or STANDBY) to set

this unit in the standby mode.

■ Notes on the digital signal

The digital input jacks of this unit can also handle

96-kHz sampling digital signals. (To utilize this, use a

source that supports 96-kHz sampling digital signals and

set the player for digital output. Refer to the operation

instructions for the player.) Note the following when a 96-

kHz sampling digital signal is input to this unit:

1. The following indication will appear on the front panel

display.

2. DSP programs cannot be selected. Sound will be

output as normal 2-channel stereo sound from only the

left and right main speakers.

Note

• If “1B MAIN SP” on the SET MENU is set to SMALL or “1D

LFE/BASS OUT” is set to BOTH, the sound is also output

from the subwoofer.

3. Adjustment of the speaker output level described on

page 47 cannot be made.

VOLUME

BASS

–

TREBLE

–

BASS

EXTENSION

PROCESSOR

DIRECT

ON OFF

Front panel Remote control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V800RDS Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info