Bedienungsanleitung Yamaha S30 (Seite 37 von 156) (Englisch)

586917

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Basics

Section

Using the Arpeggiator

Use Knob [1] to set the Arpeggiator Switch

parameter to “on.”

You can hold down multiple notes to create

complex arpeggio patterns.

When the arpeggiator is switched on, the notes

you play (and hold down) on the keyboard will

be arpeggiated using the currently selected Voice

or Performance, and according to the Arpeggio

Type, Tempo and Note Limit settings.

In Voice Mode, the currently selected Voice will

be arpeggiated. In Performance Mode, the Voices

of Parts for which both the Layer and arpeggiator

are switched on, are arpeggiated (Page 117).

Only notes within the Note Limit range will be

arpeggiated. Therefore, if the notes you play are

not arpeggiated, they may be outside this range.

Details about the Note Limit settings are given

later.

The Pitch Bend and Modulation Wheels can be

used while the arpeggiator is running.

Now try selecting other Arpeggio Types and

arepggiating different Voices.

You can use a Foot Switch (optional) to switch the

Arpeggiator on/off. Details about assigning parameters

to the Foot Switch are given on Pages 43, 129.

Setting the Tempo

You can use Knob [C] to adjust the tempo between

25 and 300 BPM. This parameter setting is used by

the Arpeggiator. Use Knob [C] to jump to the

Tempo parameter. Now use Knob [C], the [DATA]

knob or the [INC/YES] and [DEC/NO] keys to set

the tempo. You can also set the tempo using the

[TEMPO] knob on the front panel.

Setting the Note Limit

Using the Note Limit parameter, let’s set up a

Normal Voice (say, Voice Program Number

098:G02 of Internal:champ) such that the

Arpeggiator is enabled in the lower part of the

keyboard but the upper part can be used to play

melody lines. You’ll need to have already set the

Arpeggio Type (say, MuteLine).

SHIFT PAGE

PART

ELEMENT

DATAABC1 2

ARPíType) Type Tempo Switch Hold

C_ 1234 BigBeat2:Ct≥ 127 on off

SHIFT PAGE

PART

ELEMENT

DATAABC1 2

ARPíType) Type Tempo Switch Hold

Common≥BigBeat2:Dr 92 on off

1The Note Limit parameters can be set in the

ARP Limit screen, which follows immediately

after the ARP Type screen mentioned in step

3(earlier). Use the [PAGE] knob to switch to

the screen.

2Use Knob [2] to jump to the parameter for the

highest note in the range, and to set the note.

Alternatively, you can set this parameter by

pressing the note (say, E3) on the keyboard

while holding down the [SHIFT] key.

Similarly, the lowest note in the range can be

set using Knob [1], or by pressing the note

while holding down the [SHIFT] key.

Knobs [1] and [2] are used to set the Note Limits

of the keyboard range within which the

arpeggiator will play back. The cursor (≥)

immediately jumps to each respective parameter

when Knobs [1] and [2] are used. Once the

cursor is at the parameter, you can also use the

[DATA] knob or the [INC/YES] and [DEC/NO]

keys to enter settings.

Outside the Note Limit range, you can play the

keyboard normally without the notes being

arpeggiated. Therefore, you can use your left

hand to play block chords used by the

Arpeggiator and your right hand to play melody

lines in the upper part of the keyboard.

Combined with the OSC Limit parameter of the

Element Edit screen, the sound used in the

lower part of the keyboard can be different from

that in the upper part.

The Note Limit parameters in Performance

Mode are different to those in Voice Mode, and

notes outside the set range will not sound. The

Arpeggiator Switch parameter (Page 117) for

each Part should be set to “on,” except for the

Part which you wish to use to play the melody.

Then, if necessary, use the Note Limit parameter

(Page 117) to restrict the keyboard range for that

Part.

Arpeggiator Range Area for Playing Melody

Arp Note HighArp Note Low

SHIFT PAGE

PART

ELEMENT

DATAABC1 2

ARPíLimit) Note Limit

C_ 1234 C 1 - E 3

SHIFT PAGE

PART

ELEMENT

DATAABC1 2

ARPíLimit) Note Limit

C_ 1234 C -2 - G 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S30 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info