Bedienungsanleitung Yamaha S30 (Seite 53 von 156) (Englisch)

586917

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Basics

Section

8Turn the [PAGE] knob and open the LYR

Mode (Layer Mode) page. Set “on” for “Arp”

(Arpeggio switch). Select “1” for “RcvCh”

(MIDI Receive Channel).

9Turn the [PAGE] knob and open the ARP

Type (Arpeggio Type) page. Set “on” for

“Switch.”

In steps 6to 9, you now complete settings

for the lower range for Arpeggiator

performance. It will play in a Voice assigned

to Part 1 based on MIDI Receive channel 1.

Refer to page 67 for detailed settings of

Arpeggiator.

You can copy (reuse) the arpeggio settings that

belong to the Voice assigned to Part 1 (page 123).

)As in the same manner as in steps 6to 8,

make settings for the upper range. So you can

use the Knob A and select “Part02”, select a

Voice for solo performance in the MIX Vce page,

set “2” for “RcvCh” in the LYR Mode page.

Now you are ready for solo performance within

the upper range. You can play in a Voice

assigned to Part 2 based on MIDI Receive

channel 2.

If you set “on” to “Layer” in the LYR Mode

page, the RcvCh setting will be ignored.

For unwanted Parts in Split play, set their MIDI

Receive channels (RcvCh) to other than those

used for the lower and upper Parts. In the

example above, the “RcvCh” values for Part 3 to

16 must be set to any other than 1 and 2.

In Performance Edit Mode, you can make

detailed settings for every Part. In case that a

Part does not sound, make sure the volume

setting for that Part. For more information,

refer to page 115.

!Before exiting Performance Edit Mode, store

above settings in a Performance. For storing a

Performance, refer to page 124.

In Performance Play Mode, recall the Performance

you have just stored. Simply pressing the

[MASTER KEYBOARD] key activates or

deactivates the Split configuration you made

above.

4 Zones

The illustration below shows an example of a 4-

Zone configuration. A zone refers to a specific key

range on the keyboard. You can logically divide a

keyboard into up to four key ranges with separate

ARPíType) Type Tempo Switch Hold

Common UpOct1:Sq 120 on off

LYRíMode) Mode Arp Layer RcvCh

Part01 poly on off 1

MIDI channels and other associated settings so that

you can control multiple Parts at the same time. A

Split setting can divides the entire keyboard into

two absolute sections (key ranges). In a 4-zone

setting, however, each section can overlap to one

another. You can even set a section to cover or

include other sections.

In the following example, Zone 1 is set up for

performance by the Arpeggiator, Zone 2 for bass

sound, Zone 3 manual solo performance, and Zone 4

for playing an external MIDI tone generator. Also in

this settings, Zones 3 and 4 overlap in the same range,

and entire performance in four all zones is output

from the MIDI OUT connector so that you can

record that performance on an external MIDI

sequencer. You can make this configuration in the

following steps.

Before you set up a 4-Zone configuration in the

following procedure, edit and prepare necessary

Voices (for Arpeggiator and manual play) in

their associated Edit Modes.

1Press the [PERFORM] key, followed by the

[EDIT] key (each LED will light) to enter

Performance Edit Mode. Then, press the

[MASTER KEYBOARD] key to activate

Master Keyboard Mode (the LED will light).

2Select “Common” using the Knob [A], then

open the GEN M. Kbd (General Master

Keyboard) screen using the [PAGE] knob.

Turning the [PAGE] knob while holding down

the [SHIFT] key enables you to scroll though

parameters in the Menu screens (page 106).

GENíM.Kbd) Mode Lower Upper Point

Common split ch01 ch02 C 3

ZONE2 ZONE3ZONE1

ZONE4

Ch1

Part1

Performance

with Arpeggiator

Ch2

Part2

Bass Sound

Performance

Ch3

Part3

Manual solo

performance

Ch4

An external

MIDI tone generator

Ch4

Performance with

an external MIDI

tone generator

Recording entire performance

in Zones 1 to 4

An external MIDI sequencer

MIDI OUT

MIDI IN

MIDI THRU

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S30 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info