Bedienungsanleitung Yamaha S30 (Seite 73 von 156) (Englisch)

586917

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Voice Mode

■Ctgry (Effect Category)

Set the Category of the Effect. Select a desired

Category and press the [ENTER] key. The first Effect

Type in that Category will automatically be recalled.

❏Settings: Details are given in the Effect Types list of the

separate Data List.

■Type (Effect Type)

Set the type of Effect. While the Category indicator

is blinking in the display, you can press the

[ENTER] key to recall the first Effect Type in that

Category.

❏Settings: Details are given in the Effect Types list of the

separate Data List.

■Dry/Wet

Set the mix level of the wet signal (which has been

passed through the Effects Unit) and the dry signal

(which has not been passed through the Effects

Unit). This may be unavailable, depending on the

selected Effect Type.

❏Settings: D63>W ~ D=W ~ D<W63

Effect Parameter Settings

These parameters are available when you press the

[ENTER] key for certain Effect Types.

Use the [PAGE] knob to switch between screens,

and use the other knobs and the [INC/YES] and

[DEC/NO] keys to set each parameter.

When you press the [EXIT] key, you will be

returned to the Effect Type selection screen.

The number of Parameters and the contents of each

screen will vary depending on the selected Effect

Type. Details are given in the Effect Type

List/Effect Parameter List of the separate Data List.

EXIT ENTER

SHIFT PAGE

PART

ELEMENT

DATAABC1 2

EFFíEF2) TimeL TimeR TimeC Dry/Wet

DelayLCR 333.3m 166.7m 500.0m D<W63

EFFíEF2) Ctgry Type Dry/Wet [ENTER]

C 123- DLY:DelayLCR D<W63 to Edit

Effect Type selection screen

Parameter settings screen

EFFíEF2) Ctgry Type Dry/Wet [ENTER]

C 123- DLY:DelayLCR D<W63 to Edit

■Dest (Destination)

Set the parameters which will be controlled

(modulated) by the LFO Wave.

❏Settings: AMD, PMD, FMD, RESO (Resonance), PAN,

ELFOSpd (Element LFO Speed)

■ElemSw (Element Switch)

Select whether to allow variations in the LFO Wave

for each Element. Move the cursor (blinking) using

Knob [1] and use the [DATA] knob or the

[INC/YES] and [DEC/NO] keys to enable/disable

LFO Wave variations for Elements 1 to 4. Enabled

Elements are shown by number.

❏Settings: Elements 1 to 4 enabled (“1” to “4” displayed) or

disabled (“-” displayed)

■Depth

Set the LFO Wave Depth (amplitude).

❏Settings: 0 ~ 127

Common Effect

You can set two types of Insertion Effects, plus two

System Effects (Reverb and Chorus). The following

five screens are available.

EFF InsEF (Insertion Effect)

EFF EF1 (Insertion Effect 1)

EFF EF2 (Insertion Effect 2)

EFF Rev (Reverb)

EFF Cho (Chorus)

EFF InsEF (Insertion Effect)

■InsEF Connect (Insertion Effect Connect)

Set up the connection between Insertion Effects 1

and 2. If you change this setting, the symbol

denoting the signal routing (to the left of the setting)

also changes to reflect the new signal flow.

Signal routing symbols

❏Settings: 1=2 (parallel), 1➞2 (Insertion Effect 1 to 2),

2➞1 (Insertion Effect 2 to 1)

EFF EF1/2 (Insertion Effect 1/2)

You can select the Effect Category for Insertion Effect

1/2 with the Ctgry parameter and the Effect Type with

the Type parameter. After selecting the Effect Type,

you can set its parameters by pressing the [ENTER] key.

EFFíInsEF) InsEF Connect

C 1234 1=2

1=2 (parallel)

1➞2 (serial)

2➞1 (serial)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S30 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info