Bedienungsanleitung Yamaha S30 (Seite 104 von 156) (Englisch)

586917

104

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

104

Performance Mode

Performance Program Selection

There are four ways in which you can select a

Performance.

Using the BANK/PROGRAM keys

Using the [DEC/NO] and [INC/YES] keys

Using the [DATA] knob

Using the Category Search

Using the [INC/YES] and [DEC/NO] keys, the [DATA]

knob or the Category Search function is the same as

selecting the Voice directly in Voice Play Mode. Refer

to Page 60, replacing the word “Voice” with

“Performance.”

Using the BANK/PROGRAM Keys

1Press the MEMORY [INT] or [EXT] key and select

the Performance Memory. The selected Performance

Memory indicator in the display will blink.

Details about Performance Memories are given on Page 24.

2Press a BANK key ([A] to [H]) to select a Bank.

The Bank indicator in the display will blink.

Press Bank keys [A] to [D] when selecting an EXT

Performance.

If you press the [EXIT] key here, the Performance selection

process is canceled and the original Performance is

reinstated.

If the Bank has already been selected, this step is not

required.

Details about Banks are given on Page 24.

PFM Play) INT:128(H16)[Pf:Init Perf ]

EQ Low EQ Mid EQ Hi -1 +0

PLGEXT

DRUMDRUM QUICK

ACCESS

INTPRE 2PRE1

A. PIANO E. PIANO ORGAN GTR

BASS STRINGS BRASS SYNTH OTHER

CDEFGH

12345678

910111213141516

PFM Play) INT:128(H16)[Pf:Init Perf ]

EQ Low EQ Mid EQ Hi -1 +0

EXT

DRUMDRUM

INTPRE 2PRE1 PLG

3Press a PROGRAM key ([1] to [16]) to select a

Program Number.

Performances can be selected by setting the Memory,

Bank and Program Number as explained in the three

steps given above. The display also shows the

selected Performance.

Multi Edit

(Volume, Pan, Reverb/Chorus

Send, Note Shift)

You can set the output level (volume), stereo pan and

other parameters for each Part using the graphic editors

on screens 3 to 7. You can, for example, adjust each

Part’s Volume and Pan parameters in real-time while

using the synthesizer as a multitimbral tone generator

with a sequencer.

Method of Setting Up

The same procedure applies to screens 3 to 7.

1Use the [PAGE] knob to select the screen.

2Use Knob [A] to select the Part. You can choose

from, PartPL (Plug-in Part), Part01 to Part16 (Voice

Part 1 to 16). Apart from the 7th screen (Note

Shift), the Common (Layer Common) parameters are

the same for all Layer Parts.

The parameter settings for each Part are shown as a

bar graph, giving you an idea of the overall sound

balance.

You can also use the MEMORY and PART keys on

the front panel to select each Part. The keys relate to

each Part as follows.

[PRE1/2] key ......................Common (Layer Common)

[PLG] key..............................PartPL (Plug-in Part)

PART keys [1] to [16]

................

Part01 to Part16 (Voice Parts 1 to 16)

3Use Knob [B] or the [DATA] knob or the [DEC/NO]

and [INC/YES] keys to adjust the parameter settings

for each Part.

SHIFT PAGE

PART

ELEMENT

DATAABC1 2

PFM Mlt) Volume L

Part01 127 Ä ÇÇÇÇÇÇÇÇÇÇÇÇÇÇÇÇÇ›

231

12345678

910111213141516

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S30 Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info