Bedienungsanleitung Yamaha S30 (Seite 120 von 156) (Englisch)

586917

120

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

120

Performance Mode

■FMod (Filter Modulation Depth)

Set the amount by which the filter Cutoff frequency

changes when the Modulation Wheel is used.

❏Settings: 0 ~ 127

■AMod (Amplitude Modulation Depth)

Set the amount by which the amplitude modulation

changes when the Modulation Wheel is used.

❏Settings: 0 ~ 127

CTL AT Control (AT Control Depth)

(Multi Plug-in Parts only)

Keyboard aftertouch can be used to control the

pitch/filter/amplitude parameters for each Multi Plug-

in Part (17 to 32).

■Pitch

Set the amount (in semitones) by which the pitch

changes when aftertouch is applied.

❏Settings: -24 ~ +24

■Filter

Set the amount by which the filter Cutoff frequency

changes when aftertouch is applied.

❏Settings: -64 ~ +63

■Amp

Set the amount by which the output level

(amplitude) changes when aftertouch is applied.

❏Settings: -64 ~ +63

CTL AT Modulation (AT Modulation

Depth) (Multi Plug-in Parts only)

Keyboard aftertouch can be used to control the amount

of pitch/filter/amplitude modulation applied to each

Multi Plug-in Part (17 to 32).

■PMod (Pitch Modulation Depth)

Set the amount by which the pitch modulation

changes when aftertouch is used.

❏Settings: 0 ~ 127

■FMod (Filter Modulation Depth)

Set the amount by which the filter Cutoff frequency

changes when aftertouch is used.

❏Settings: 0 ~ 127

CTLíAT Modulation) PMod FMod AMod

Part17 127 127 127

CTLíAT Control) Pitch Filter Amp

Part17 +24 +63 +63

■AMod (Amplitude Modulation Depth)

Set the amount by which the amplitude modulation

changes when aftertouch is used.

❏Settings: 0 ~ 127

CTL AC Control (AC Control Depth)

(Multi Plug-in Parts only)

Control Changes (Assignable Controllers) can be used

to control the filter/amplitude parameters for each

Multi Plug-in Part (17 to 32).

■Source

Set the MIDI Control Change number used to

control the Filter/Amp parameters.

❏Settings: off, 1 ~ 95

■Filter

Set the amount by which the filter Cutoff frequency

changes when the controller (Source) is used.

❏Settings: -64 ~ +63

■Amp

Set the amount by which the output level

(amplitude) changes when the controller (Source) is

used.

❏Settings: -64 ~ +63

CTL AC Modulation (AC Modulation

Depth) (Multi Plug-in Parts only)

Control Changes (Assignable Controllers) can be used

to control the amount of pitch/filter/amplitude applied

to each Multi Plug-in Part (17 to 32).

■PMod (Pitch Modulation Depth)

Set the amount by which the pitch modulation

changes when the controller (Source) is used.

❏Settings: 0 ~ 127

■FMod (Filter Modulation Depth)

Set the amount by which the filter Cutoff frequency

changes when the controller (Source) is used.

❏Settings: 0 ~ 127

■AMod (Amplitude Modulation Depth)

Set the amount by which the amplitude modulation

changes when the controller (Source) is used.

❏Settings: 0 ~ 127

CTLíAC Modulation) PMod FMod AMod

Part17 127 127 127

CTLíAC Control) Source Filter Amp

Part17 04[FootCtrl] +63 +63

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S30 Seite 120

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info