Bedienungsanleitung Yamaha S70XS (Seite 8 von 15) (Englisch)

587000

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

S90 XS/S70 XS Remote Editor Windows: Edit window

S90 XS/S70 XS Remote Editor Owner’s Manual

7 Control Template Selection box

Shows the currently selected Control Template. You can select the previous/next template by clicking the

scroll button at the right of this box, or select any template in the current bank by clicking the triangular

button.

8 Instrument Select box

Shows the VSTi name which is controlled by the Knobs and Sliders. You can change the VSTi by clicking

the triangular button then selecting the desired one. You can also input the VSTi name directly in this box

manually. Make sure to input the VSTi name correctly.

n If the desired VSTi is not shown even when you click the triangular button, refer to the Troubleshooting

section on page 14.

9 Edit section

The Knobs and Sliders illustrated here correspond to the Knobs and Sliders on the top panel of the S90

XS/S70 XS. Here, you can assign the desired function to each of the Knobs and Sliders.

9-1 Remote/CC buttons

When Remote is selected, using the Knobs and Sliders generates the Remote Control messages

exclusive for Cubase. When CC is selected, using the Knobs and Sliders generates MIDI Control

Change messages.

9-2 Function Assignment boxes

The Knobs and Sliders illustrated here are equivalent to the Knobs and Sliders on the S90 XS/S70

XS. Each of the boxes at the right side of the Knob and Slider shows the function assigned to the

corresponding Knob and Slider. (The function shown here differs depending on the Remote/CC

button status.) You can change the function assigned to each of the Knobs and Sliders by clicking

a desired box, then selecting the desired function in the ) Controller Setting section. In the

ONLINE status, setting this parameter changes the settings of the S90 XS/S70 XS in real time.

9-3 [Reverse] button

Reverses the direction of the Slider operation, determining whether moving the Slider up or down

increases or decreases the value. For example, when a parameter which is increased by moving

the Slider up is assigned to a Slider and this button is turned on, moving the Slider up decreases

the parameter value. Clicking the button once again restores the original state.

) Controller Setting section

Determines the function of the Knobs and Sliders corresponding to the column selected in the 9 Edit

section. There are two sections here: Remote section and CC (Control Change) section.

)-1 Remote section

Assigns the function to the Function Assignment box selected in the 9 Edit section. The setting

here is available when the Remote/CC button is set to "Remote." Clicking "Remote" at the left of this

section also sets the Remote/CC button of the Edit section to "Remote.

• Control Parameter

Click the triangular button to call up the menu, then select the desired function.

n The "QuickCtrl1" – "QuickCtrl8" parameters only apply to Cubase 4.1 or later.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S70XS Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S70XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info