Bedienungsanleitung Yamaha S90ES (Seite 17 von 204) (Englisch)

587008

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

Front Panel

The Controls &

Connectors

Owner’s Manual

9 [SF1] - [SF6] (Sub Function) buttons Page 23

These buttons located directly below the LCD display

call up the corresponding sub functions indicated in the

display. In the display hierarchy, these sub functions

[SF] rank just below the functions [F].

These buttons can be also used to store/recall the

Arpeggio type in each Play mode. (page 39)

) LCD Display

The large backlit LCD displays the parameters and

values related to the currently selected operation or

mode.

! [INFORMATION] button Page 27

For calling up a special “help” feature that shows

information about the currently selected mode. You can

go back to the previous display by pressing this button

again or pressing any other button.

Depending on the selected display, this button may be

used to call up a window for inputting characters (page

27), or for selecting keys (page 53).

@ Data dial Page 25

For editing the currently selected parameter. To increase

the value, turn the dial right (clockwise); to decrease the

value, turn the dial left (counter-clockwise). If a

parameter with a wide value range is selected, you can

change the value in broader strokes by quickly turning

the dial.

# [INC/YES] button Page 25

For increasing the value of the currently selected

parameter. Also use it to actually execute a Job or a

Store operation.

$ [DEC/NO] button Page 25

For decreasing the value of the currently selected

parameter. Also use it to cancel a Job or a Store

operation.

n You can also use the [INC/YES] and [DEC/NO] buttons to quickly

move through parameter values in 10-unit jumps, especially those

with large ranges. Simply hold down one of the buttons (of the

direction you want to jump), and simultaneously press the other. For

example, to jump in the positive direction, hold down the [INC/YES]

button and press [DEC/NO].

% Cursor buttons Page 25

The cursor buttons move the “cursor” around the LCD

display screen, highlighting and selecting the various

parameters.

^ [EXIT] button Page 22

The menus and displays of this synthesizer are

organized according to a hierarchical structure.

Press this button to exit from the current display and

return to the previous level in the hierarchy.

& [ENTER] button

Use this button to execute a Job or a Store operation.

Also use this button to actually enter a number when

selecting a Memory or Bank for Voice or Performance.

In the File mode, use this button to go to the next lowest

level in the selected directory.

n In the File mode, the [EXIT] and [ENTER] buttons may be used to

move folders in the USB storage device.

* MODE buttons Page 22

These buttons select the operating modes (e.g., Voice

mode).

( [REMOTE] button Page 78

The Remote mode lets you control sequencer software

on your computer from the panel controls of the

instrument. Turn the [REMOTE] button on to enter the

Remote mode.

n When setting the MIDI IN/OUT parameter to “MIDI” ([UTILITY] →

[F5] MIDI → [SF4] OTHER) or setting both of Mode A and Mode B

to “off” ([UTILITY] → [F4] CTL ASN → [SF4] REMOTE), you cannot

enter the Remote mode even by pressing the [REMOTE] button. Set

these parameters to appropriate values (page 78) then enter the

Remote mode.

º [EFFECT BYPASS] button Page 119

The extensive effect section of the instrument provides

Insertion effects (eight sets, with two effect units per

set), System effects (Reverb and Chorus), and Master

effects.

The [EFFECT BYPASS] button enables you to turn the

corresponding effect blocks on or off with a single

touch. From the following display, you can select the

speciﬁc effect(s) to be bypassed when the [EFFECT

BYPASS] button. [UTILITY] → [F1] GENERAL → [SF3]

EF BYPS display

n If you install an optional Effect Plug-in Board (PLG100-VH), Plug-in

Insertion effects can also be used (page 103).

¡ [ARPEGGIO] button Page 39

Press this button to enable or disable playback of the

Arpeggio for each Voice, Performance, Multi. If the

Arpeggio Switch of the selected part is set to off in the

Performance/Multi mode, however, pressing this button

has no effect.

™ Bank buttons Pages 30, 32

Each button selects a Voice Bank. When the

[CATEGORY SEARCH] button is turned on, these

buttons can be used to select the desired category

(printed below each button).

£ Group [A] - [H] buttons Pages 31, 32

Each button selects a Voice or Performance Group.

When the [CATEGORY SEARCH] button is turned on,

these buttons can be used to select the desired

category (printed below each button).

¢ Number [1] - [16] buttons

Use of these buttons differs depending on the on/off

status of the [TRACK SELECT] and [MUTE] buttons.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S90ES Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S90ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info