Bedienungsanleitung Yamaha S90ES (Seite 20 von 204) (Englisch)

587008

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

Using USB storage devices

The Controls &

Connectors

Owner’s Manual

Using USB storage devices

When using USB storage devices, make sure to connect them to the USB TO DEVICE connector, and follow the important

precautions below.

■ Compatible USB devices

Connect only a USB storage device (such as hard disk, CD-

ROM, ﬂash disk and other drives) to the USB TO DEVICE

connector. Other devices such as a computer keyboard or

mouse cannot be used.

Both bus-powered (powered by the host device) or self

powered (battery or external power supply) types can be

used.

The S90 ES does not necessarily support all commercially

available USB storage devices. Yamaha cannot guarantee

operation of USB storage devices that you purchase.

Before purchasing USB storage devices, please consult

your Yamaha dealer, or an authorized Yamaha distributor

(see list at end of the Owner’s Manual) for advice, or see the

following website:

http://www.yamahasynth.com/

n Although CD-R/W drives can be used to load data to the instrument,

they cannot be used for saving data. However, you can transfer

data to a computer and save data to a CD using the CD-R/W drive

on the computer.

■ Formatting USB storage media

When a USB storage device is connected or media is

inserted, a “USB device unformatted.” message may

appear in the LCD display, indicating that the device or

media must be formatted for use. Execute the Format

operation in the File mode (Page 168).

■ To protect your data (Write-protect):

To prevent important data from being inadvertently erased,

apply the write-protect provided with each storage device

or media.

If you are saving data to the USB storage device, make sure

to remove the write-protect.

Precautions when using the USB TO DEVICE

connector

Never turn the USB device’s power on/off and never

plug/unplug the USB cable when the connected USB

storage device is the self powered type. Doing so may

result in the operation of the synthesizer “freezing” or

hanging up.

While the instrument is accessing data (such as in the

Save, Load and Delete operations in the File mode),

do NOT unplug the USB cable, do NOT remove the

media from the device, and do NOT turn the power off

to either device. Doing so may corrupt the data on

either or both devices.

USB connector types

There are two different types of USB connectors, and

the rear panel of the instrument features both. Take

care not to confuse the two.

USB TO HOST connector

This type is used to connect the instrument to a

computer, and allows you to transfer MIDI data

between the devices. The USB connection between

the instrument and the computer can only be used for

transfer of MIDI data. Unlike MIDI, USB can handle

multiple ports via a single cable.

USB cables have different connectors on each end:

the A type and the B type. Connect the A type to your

computer and the B type to the USB TO HOST

connector.

USB TO DEVICE connector

This type is used to connect the instrument to a USB

storage device, and allows you to save data you’ve

created to the connected device, as well as load data

from the connected device. This lets you save the data

created on this instrument to the external USB storage

device and load the data from the external USB

storage device to the instrument. Save and Load

operations are executed in the File mode (page 168).

USB cables have different connectors on each end:

the A type and the B type. Connect the A type to the

USB TO DEVICE connector and the B type to the USB

storage device.

n The computer cannot access the USB storage device

connected to the S90 ES’s USB TO DEVICE connector, even

if connecting as shown above. Only from the File mode on

the instrument itself can you access the data on the USB

storage device connected to the USB TO DEVICE connector.

n Though the S90 ES supports the USB 1.1 standard, you can

connect and use a USB 2.0 storage device with the S90 ES.

However, note that the transfer speed complies to USB 1.1.

S90 ES

MIDI data transfer

Connecting to a computer

Connecting to a USB

storage device (hard

disk, CD-ROM, ﬂash

disk and other drives)

Saving/Loading data in

the File mode (page 168)

A type

B type

USB TO DEVICE

connector

USB TO HOST

connector

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S90ES Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S90ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info