Bedienungsanleitung Yamaha S90XS (Seite 39 von 64) (Englisch)

587001

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

S90 XS/S70 XS Owner’s Manual

Using a Connected Computer

Setting up for Remote Control

NOTE Before making the setup of DAW Remote, make sure to install

the USB-MIDI Driver and the S90 XS/S70 XS Remote Tools

correctly.

1 Connect this instrument to the computer via

a USB cable (page 36).

2 Press the [DAW REMOTE] button to enter the

Remote mode.

3 Press the [UTILITY] button to call up the

Remote display of the Utility mode.

4 Set the “DAW Select” to the desired DAW.

5 Press the [STORE] button to store this

setting.

6 Start the DAW software on the computer

connected to this instrument.

This section explains how to set up after starting each

application.

NOTE When the cable between the S90 XS/S70 XS and the Windows

computer is disconnected or the S90 XS/S70 XS is turned off

accidentally, the DAW will not recognize the S90 XS/S70 XS

again even if you connect the cable again or turn the S90 XS/S70

XS on. If this occurs, exit the DAW software, then restart it after

setting up the S90 XS/S70 XS and making sure the connection is

secure.

Cubase

The settings will be completed by installing S90 XS/S70

XS Remote Tools.

SONAR

1 Pull down the [Options] menu and select [MIDI

Devices] to call up the “MIDI Devices” window.

2 Add “Yamaha S90 XS (S70 XS)-2” to the Input Device,

then add “Yamaha S90 XS (S70 XS)-2” to the Output

Device.

3 Pull down the [Options] menu and select [Control

Surfaces] to call up the Control Surface window.

4 Click the [+] button, select “Mackie Control,” then set

the Input Port to “Yamaha S90 XS (S70 XS)-2” and set

the Output Port to “Yamaha S90 XS (S70 XS)-2.”

Digital Performer

1 In the Audio/MIDI setup of a Macintosh computer,

connect Port 2 of the interface of the S90 XS/S70 XS

to Port 2 of the tone generator. When there is only one

Port for the tone generator, add the new Port, then

connect it to the interface.

2 Pull down the [Setup] menu and select [Control

Surfaces] to call up the Control Surface window.

3 Click the [+] button.

4 Select “Mackie Control” in the Driver section.

5 In the box for setting “Unit” and “MIDI,” select “Mackie

Control” in the “Unit” section and select “S90 XS (S70

XS) New Port 2” in the “MIDI” section.

Logic Pro

1 Select the [Preference] menu  [Control Surfaces] 

[Settings] to call up the Settings window.

2 Select the [New] menu  [Install].

3 Select “Mackie Control” in the model, then add it as a

control surface.

4 Set the MIDI Output Port to “Yamaha S90 XS (S70

XS)-2.”

5 Set the MIDI Input Port to “Yamaha S90 XS (S70 XS)-

2.”

NOTE Mackie Control is the trademark of Mackie Designs, Inc.

NOTE For details about the button operations and functions, refer to the

separate PDF manual.

Setting up the S90 XS/S70 XS

Setting up the DAW of the computer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S90XS Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S90XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info