Bedienungsanleitung Yamaha S90XS (Seite 51 von 64) (Englisch)

587001

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

S90 XS/S70 XS Owner’s Manual

Display Messages

Load All. Are you sure?

Confirms whether you want to load the “All” or not in the File mode.

Load Seq Chain file. Are you sure?

Confirms whether you want to load the “Seq Chain file” or not in the File mode.

MIDI buffer full.

Failed to process the MIDI data because too much data was received at one time.

MIDI checksum error.

An error occurred when receiving bulk data.

Mixing Voice full.

The Mixing Voice cannot be stored because the number of Voices already stored has exceeded the

maximum capacity.

No read/write authority to the file.

No permission for reading/writing on the external storage device.

Now executing Factory set...

Please keep power on.

Indicates this synthesizer is restoring the factory-programmed settings.

Now loading...

Indicates that a file is being loaded.

Now receiving MIDI bulk data...

Indicates this synthesizer is receiving MIDI bulk data.

Now saving...

Indicates that a file is being saved.

Now scanning autoload file...

Scanning for the files specified for Auto Load.

Now transmitting MIDI bulk data...

Indicates this synthesizer is transmitting MIDI bulk data.

Overwrite. Are you sure?

A save operation will overwrite data on the external storage device as destination, and this message

confirms whether it is OK to continue or not. Press [ENTER] (Yes) or [EXIT] (No) as required.

Part x is used for Drum Assign.

This message appears when the Part switches of all Parts are set to on, and the Drum Assign function

used Part “x” for the Drum Part in Performance mode.

Part x is used for Layer.

This message appears when the Part switches of all Parts are set to on, and the Layer function used

Part “x” for the Layer Part in the Performance mode.

Part x is used for Split.

This message appears when the Part switches of all Parts are set to on, and the Split function used

Part “x” for the Split Part in the Performance mode.

Please stop Audio Play/Rec.

The operation you have attempted to execute cannot be done during Audio Rec/Play recording or

playback.

Please stop sequencer.

The operation you have attempted to execute cannot be done during SEQ PLAY playback.

Save Audio Rec file?

Confirming whether you want to save the recorded file or not in Audio Rec/Play mode.

Seq Chain stored.

This message appears when the Seq Chain settings has been stored.

Sequence memory full.

The internal memory for Sequence data is full, preventing any further operation (such as recording,

editing, Job execution, MIDI reception/transmission, or loading from the external storage device).

Try again after erasing unwanted Song, Pattern, or User Phrase data.

Set Part 1 Ins Sw to on to use Vocoder.

Set the Insertion Switch of Part 1 to on to use the Vocoder when setting the Output Select of the A/D

Input part to “Vocoder.”

MIDI data overload.

The amount of MIDI data is too large to play.

Store Voice?

Confirms you want to store the editing Voice when executing the Performance Creator (Layer/Split/

Drum Assign) feature to the editing Voice in the Voice mode.

The received MIDI bulk data’s type is not

compatible with the current mode/voice

type.

This message appears when MIDI bulk data is received in a different mode other than the currently

selected mode. The bulk data is received in the same mode as the transmitting mode. This message

also appears when the Voice type (Normal Voice/Drum Voice) of the destination Mixing Parts is

different from the bulk-dump-transferred Voice type. The destination Parts assigned to the same Voice

type as the bulk-dump-transferred Voice type are selected.

This Performance uses User Voices.

The loaded Performance uses User Voices. Confirm whether the same Voices as at the time of saving

are stored at the same User Bank/Number or not.

USB connection terminated.

Press any button.

A break in the connection with the USB storage device has occurred because of an abnormal electric

current. Disconnect the USB storage device from the USB TO DEVICE connector, then press any of

the panel buttons.

Utility stored.

The settings in the Utility mode have been stored.

LCD Indication Description

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S90XS Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S90XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info