Bedienungsanleitung Yamaha SRT-1000 (Seite 15 von 194) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

554620

Zoom out

Zoom in

Vorherige Seite

1/194

Nächste Seite

Playing back audio from a Bluetooth device on the

unit

1 With the unit turned on, press the BLUETOOTH key on the supplied

remote control to select Bluetooth as the input source.

The BLUETOOTH indicator on the front panel lights up in green.

2 Turn on the Bluetooth function of the device.

When Bluetooth connection is made correctly, the BLUETOOTH indicator of the

unit flashes 3 times.

3 Play back a song on the device.

NOTE

• Perform Bluetooth connection with the device and unit within 10 meters (33 ft) of each other.

• It may be necessary to select “SRT-1000 Yamaha” in the Bluetooth device list again, in the event that a

connection problem occurs. You may have to change the output setting to output audio to the unit,

depending on the Bluetooth device you are using.

• Adjust the volume level of the Bluetooth device as required.

• If a Bluetooth device is already connected to the unit, terminate that Bluetooth connection, then connect

with the new device.

Terminating Bluetooth connection

Bluetooth connection is terminated in the following cases. When the unit is turned on

and the Bluetooth connection is terminated, the BLUETOOTH indicator flashes once.

• The Bluetooth function is turned off on the compatible device.

• The BLUETOOTH key is pressed for more than 3 seconds.

• The unit is turned off.

Using the Bluetooth standby mode

The Bluetooth standby mode allows you to turn on (or off) the unit automatically, that

interlocked by the operation of the Bluetooth device.

1 With the unit turned on, hold down the BLUETOOTH STANDBY key

for more than 3 seconds.

Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the

mode between enabled and disabled.

When the Bluetooth standby mode is enabled and the unit is turned off, the

STATUS indicator lights up in red. (Bluetooth standby)

Using the HOME THEATER CONTROLLER application

By installing the dedicated free application “HOME THEATER CONTROLLER” to a

Bluetooth device, such as a smartphone, you can perform various operations easily and

conveniently with the Bluetooth device.

(Setting items: basic operation, surround mode, sound adjustments)

For details on “HOME THEATER CONTROLLER,” see the product information on our

website.

Lights up

Flashes 3 times

Functions available on Bluetooth devices with Bluetooth standby mode enabled

Power on interlock function (when the unit is turned off)

When Bluetooth connection is made on the device, the unit will turn on and will be ready to play back

sound from the device.

Power off interlock function (when the unit is turned on)

The unit will be turned off when Bluetooth connection is terminated on a Bluetooth device. (Only when

BLUETOOTH is selected as the input source.)

Flash 3 times (enabled), flash once (disabled)

Lights up (red)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha SRT-1000 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info