Bedienungsanleitung Yamaha T-D500 (Seite 11 von 142) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

557179

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

English

9 En

OPERATIONS

DAB TUNING

2 Press B / C to select the desired station

order setting and then press ENTER.

While pressing B / C to select the desired setting, “*” is

displayed next to the current setting.

■ Tune Aid

Measure reception strength of the received signal (from 0

(none) to 100 (best)).

1 Select “Tune Aid” in the DAB function menu.

2 Press B / C to select the desired DAB

channel.

The strength of the selected DAB channel signal is

displayed on the front panel display. Adjust the

orientation of the DAB antenna so that the strength of

the selected DAB channel signal gets stronger.

■ Dynamic Range

You can change the dynamic range compression setting.

This is especially useful when you listen to a DAB station

in a noisy environment or at a low volume at night.

1 Select “Dynamic Range” in the DAB function

menu.

2 Press B / C to select the desired dynamic

range compression setting and then press E

or ENTER.

While pressing B / C to select the desired setting, “*” is

displayed next to the current setting.

■ DAB Clear

Clears all DAB station information and preset settings

stored in the unit.

You can also perform DAB Clear by pressing and holding

CLEAR for more than 3 seconds in the preset tuning mode. See

“Clearing the preset DAB station” on page 8.

Once DAB Clear is performed, the deleted information and preset

settings cannot be restored.

1 Select “DAB Clear” in the DAB function

menu.

2 Press B / C to select “OK” and then press E

or ENTER.

After DAB Clear is complete, the Autoscan Full

function starts automatically (see page 6).

To cancel the operation, select “CANCEL”.

■ Auto Power Down

This unit automatically enters standby mode if it is not

operated for specified amount of time.

This setting is effective for all tuning modes.

1 Select “Auto Power Down” in the DAB

function menu.

2 Press B / C to select the desired auto power

down setting and then press E or ENTER.

While pressing B / C to select the desired setting, “*” is

displayed next to the current setting.

Choice Description

Alphanumeric

Default setting. Stations are listed in the

alphanumeric order.

Active

This unit lists the currently active DAB

stations first, and then other DAB

stations in the alphanumeric order.

Ensemble

Select this setting to browse through the

registered DAB stations from the lowest

to the highest channel labels (see page

10).

Choice Description

AUTO

Default setting. This unit utilizes the

dynamic range compression

automatically if it is transmitted.

OFF

This unit does not utilize the dynamic

range compression.

Note

Choice Description

OFF

This unit will not be set to standby

mode automatically.

4 Hours,

8 Hours,

12 Hours

This unit is set to standby mode

automatically after the specified

amount of time passes.

Default setting is “8 Hours”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha T-D500 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info