Bedienungsanleitung Yamaha W5 (Seite 25 von 170) (Englisch)

588963

Zoom out

Zoom in

Vorherige Seite

1/170

Nächste Seite

BEFORE YOU BEGIN

SONG MULTIS

The Song Multi function lets you assign an Instrument voice to each of the 16 TRACK

buttons on the panel, plus designate all sound mixer and other settings for each track as

well as for the overall mix including volume, panning and digital effects settings, as well

as tuning, note shift and pitch bend parameters.

A song multi is the complete configuration of all MIDI, voice, mixer and other

assignments and settings which determine the operating status of the W5/W7.

Depending on your particular needs for a setup, i.e., whether you are composing,

practicing, recording, or performing live or are using the W5/W7 as a master keyboard

controller or as a slave tone generator a song multi may be comprised of the following:

● multi settings (i.e., all parameter settings), song

sequence data, and accompanying Song voice bank;

● multi settings with accompanying Song voice bank;

● multi settings only.

A song multi can be stored in any of the 16 song memories in the W5/W7 and saved to

floppy disk and loaded back in via the disk drive. And since each song memory also

contains a Song voice bank into which you can store up to 128 normal voices and 2 drum

voices copied from the Internal, Preset or GM voice bank (or the External voice bank if

the optional Expansion Wave/Voice Board is installed), you can organize an entire bank of

Song voices specifically for a single multi. This lets you keep all data for a multi in one

place, i.e., inside a single song memory.

Song multis are an integral part of the W5/W7 s flexibility and user friendliness.

Basically, you define the multis naturally as you work, whether you re composing, or

recording, or preparing setups for live performance by selecting a track and assigning an

Instrument voice to it, setting a pan position here, an effect send level there, and so on.

Every multi will take on the unique character of the work session. Then you save your

multis to floppy disk, so that whenever you need any particular multi, you can load it back

into one of the 16 song memories and be assured that all settings and other data are always

exactly as they should be and instantly accessible.

There are literally hundreds of parameters which make up a song multi, but only four

basic steps involved in the process of creating and defining the multi: (1) select a song

memory location; (2) assign Instrument voices to tracks and determine multi parameter

settings as you work, whether you re recording or structuring a performance setup; (3)

store the multi in song memory as you work; and (4) save the multi to floppy disk. (For

more information about song multis, see Song Mode, page 74.)

NOTE: Song multis can be saved to

floppy disk and loaded back into the

W5/W7 in various ways, including

all 16 songs with accompanying

Song voice banks, one song only,

one song with accompanying Song

voice bank, and in the Standard

MIDI File format. For more

information on saving to and

loading from disk, see Disk Mode,

page 131.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha W5 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha W5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info