Bedienungsanleitung Yamaha W7 (Seite 8 von 170) (Englisch)

588964

Zoom out

Zoom in

Vorherige Seite

1/170

Nächste Seite

● Make regular backup copies of important data to a separate

floppy disk, and keep your backup disks in a separate, safe

place.

● To ensure the safety of your data (and of the disk drive

itself) always use floppy disks from a well-known, reliable

manufacturer. No-name brand disks may cause trouble.

IMPORTANT NOTE: Yamaha recommends that you regularly save

your data onto floppy disks and store the disks in a safe place! Yamaha

cannot be held responsible for the accidental loss of important music

data.

HANDLE FLOPPY DISKS AND TREAT THE DISK DRIVE

WITH CARE

● Use only 3.5 2DD type floppy disks.

● The actual recording medium inside a floppy disk has a fine

coating of magnetic particles in which the data is stored. To

protect this coating as well as the disk drive s delicate read-

write head, always keep floppy disks in their protective

cases when they are not in use.

● Do not place heavy objects on a disk or bend or apply

pressure to the disk in any way. Do not open the sliding

shutter and touch the exposed surface of the floppy disk

inside. Do not expose the disk to direct sunlight, extremely

high or low temperatures, or excessive humidity, dust or

liquids. Do not expose the disk to magnetic fields, such as

those produced by televisions, speakers, motors, etc., since

magnetic fields can partially or completely erase data on the

disk, rendering it unreadable.

● Never use a floppy disk with a deformed shutter or housing.

● Do not attach anything other than the provided labels to a

floppy disk. Also make sure that labels are attached in the

proper location.

● To insert a floppy disk into the W5/W7 s disk drive, hold

the disk so that the label of the disk is facing upward and

the sliding shutter is facing forward, towards the disk

insertion slot. Carefully insert the disk shutter first into

the slot, slowly pushing it all the way in until it clicks into

place and the eject button pops out.

● When writing and reading data to and from disk, the red

LED on the floppy disk drive will light up. Never attempt to

remove the disk or turn the power off while this LED is lit.

Doing so could damage the disk and possibly the disk drive.

● To eject a floppy disk, press the eject button slowly as far as

it will go; the disk will automatically pop out. When the

disk is fully ejected, carefully remove it by hand. If the eject

button is pressed too quickly, or if it is not pressed in as far

as it will go, the disk may not eject properly. The eject

button may become stuck in a half-pressed position with

the disk extending from the drive slot by only a few

millimeters. If this happens, do not attempt to pull out the

partially ejected disk, since using force in this situation can

damage the disk drive mechanism or the floppy disk. To

remove a partially ejected disk, try pressing the eject button

once again, or push the disk back into the slot and then

repeat the eject procedure.

● Never insert anything but floppy disks into the disk drive.

Other objects may cause damage to the disk drive or floppy

disks.

● Be sure to remove the floppy disk from the disk drive before

turning off the power. A floppy disk left in the drive for

extended periods can easily pick up dust and dirt that can

cause data read and write errors.

CLEANING THE DISK DRIVE READ/WRITE HEAD

● Clean the read/write head regularly. This instrument

employs a precision magnetic read/write head which, after

an extended period of use, will pick up a layer of magnetic

particles from the disks used that will eventually cause read

and write errors. To maintain the disk drive in optimum

working order Yamaha recommends that you use a com-

mercially-available dry-type head cleaning disk to clean the

head about once a month. Ask your Yamaha dealer about

the availability of proper head-cleaning disks.

SERVICE AND MODIFICATION

● The W5/W7 contains no user serviceable parts, so never

open the case or tamper with the internal circuitry in any

way. Doing so may result in electrical shock or damage to

the instrument. Refer all servicing to qualified Yamaha

service personnel.

THIRD PARTY SOFTWARE

● Yamaha cannot take responsibility for software produced for

this product by third-party manufacturers. Please direct any

questions or comments about such software to the manufac-

turer or their official agents.

IMPORTANT NOTE: Yamaha cannot be held responsible for

damage to the W5/W7 resulting from improper handling or operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha W7 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha W7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info