Bedienungsanleitung Yamaha W7 (Seite 149 von 170) (Englisch)

588964

149

Zoom out

Zoom in

Vorherige Seite

1/170

Nächste Seite

UTILITY MODE

147

CONTROLLERS

The Controllers function lets you set the continuous slider (CS) assignment, the foot

volume assignment, and the foot controller initial value.

The W5/W7 s various controllers can send MIDI control change information, including

continuous type and on/off type control, as defined by the MIDI specification.

CONTINUOUS TYPE

001 Modulation wheel

002 Breath controller

004 Foot controller

005 Portamento time pedal

006 Data entry

007 Main volume

008 Balance control

010 Panpot

011 Expression

ON/OFF TYPE

064 Sustain

065 Portamento

066 Sostenuto

067 Soft pedal

069 Hold 2

084 Portamento control (legato)

091 Ex effect depth (reverb)

092 Tremolo depth (effect 2)

093 Chorus depth

094 Celeste depth (effect 4)

095 Phaser depth (delay)

● ACCESSING CONTROLLERS

To access the Controllers function, from within the Utility

Mode main menu screen, position the cursor over CON-

TROLLERS and press ENTER, or simply press [F5] ( Ctrl ).

The Controllers screen will appear.

CS ASSIGN (off, 001 ~ 031, 033 ~ 119) - For

assigning the function of the continuous slider. The CS

may be used for controlling W5/W7 parameters and

MIDI data, as well as for sending control change

messages to external MIDI devices, since the CS will

transmit data using the MIDI control number you

specify. If you want to use the CS to control the W5/

W7 s voices, make sure that the MIDI control number

you assign to it matches the MIDI control number

selected for the parameter you want to control. (Control

change numbers 000 and 032 are used by the bank

select message and cannot be chosen.)

FOOT VOLUME ASSIGN (007: main volume, 011:

expression) - For setting the MIDI control change

number of the Foot Volume controller.

MAIN VOLUME - When set to 007 (main volume),

the W5/W7 foot control can function as the main

volume control. MIDI messages will be sent accord-

ing to the Foot Volume controller position. If the

Insertion Effect is on, the main volume is controlled

after the Insertion Effect, and the Expression Low

Limit assignment will not be effective.

EXPRESSION - When set to 011 (expression), the

foot controller functions as an expression pedal.

MIDI messages will be sent according to the Foot

Volume controller position, as determined by the

Expression Low Limit assignment (see Voice Edit

Mode, Controller function, page 122).

FC INIT VALUE (0 ~ 127) - For assigning the foot

controller initial value when the foot controller is not

connected. When using the foot controller in realtime, this

value has no effect. When receiving MIDI foot controller

messages, the value set here is the maximum value that the

W5/W7 will receive. (The value set here also determines the

reset value of the Synthesizer Setup Controller; see page

145, above.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha W7 Seite 149

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha W7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info