652995
31
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
SETTINGS (Menu) Item Setting values Default Explanation
User Interface
Front Panel Operation
Off / On On
Enables/disables operation using the front panel (other than the
power key).
Remote
Sensor
Off / On On
Enables/disables operation using the remote control. When this is
“Off”, the unit can still be operated by other means.
ID
ID1 /
ID2 ID1
Changes the ID of the remote control from which the unit receives
signals.
To change the ID of the remote control, set it as follows.
Set to ID1: on the remote control, hold down f and PRESET
1
at the same time for 5 seconds.
Set to
ID2: on the remote control, hold down f and PRESET
2
at the same time for 5 seconds.
Access device Indication
- -
Lights the LED of the device currently being used for operation via
a web browser.
Bluetooth
Bluetooth
Off
/ On On Enables/disables the Bluetooth function.
Audio Receive
Standby
Off / On On
Enables/disables the feature allowing the unit to be turned on by
Bluetooth devices (Bluetooth Standby).
Private Mode
Off / On Off
Sets whether or not the unit responds to searches other than from
the paired Bluetooth device. When this is “
On”, the unit does not
respond to searches.
Disconnect
- -
Terminates the Bluetooth connection between the Bluetooth device
and the unit.
Audio Send Transmitter
Off /
On Off Enables/disables transmission of Bluetooth audio.
Other Setup
Auto Power Standby
Off / 20min / 2h /
4h / 8h / 12h
Off
Sets the unit to be automatically set to standby mode when there
are no operations for a specified amount of time.
When this is set to 20min
, the unit will only be set to standby mode
automatically if there is no input signal during the 20 minutes
without any operations.
Fan Mode
Off / Auto / On Auto Sets cooling fan operation to “Off”, “Auto” or “On”.
Memory Guard
Off / On Off
Protects the settings of the unit and prevents them from being
modified.
Network Info
- -
Displays network information about the unit, such as its MAC
address.
En
31
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

yamaha-wxa-50

Suche zurücksetzen

  • Der WXA regelt ständig auf volle Lautstärke und reagiert nicht auf die Lautstärkeregler sowohl am Gerät, am Handy und der Fernbedienung. Der LS Schalter ist auf PRE AMP eingestellt. Eingereicht am 17-3-2018 14:35

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha WXA-50 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha WXA-50

Yamaha WXA-50 Bedienungsanleitung - Deutsch - 45 seiten

Yamaha WXA-50 Bedienungsanleitung - Deutsch - 116 seiten

Yamaha WXA-50 Bedienungsanleitung - Englisch - 52 seiten

Yamaha WXA-50 Bedienungsanleitung - Holländisch - 116 seiten

Yamaha WXA-50 Bedienungsanleitung - Holländisch - 45 seiten

Yamaha WXA-50 Bedienungsanleitung - Dänisch - 116 seiten

Yamaha WXA-50 Bedienungsanleitung - Französisch - 52 seiten

Yamaha WXA-50 Bedienungsanleitung - Italienisch - 116 seiten

Yamaha WXA-50 Bedienungsanleitung - Spanisch - 52 seiten

Yamaha WXA-50 Bedienungsanleitung - Schwedisch, Norwegisch, Finnisch - 116 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info