652995
35
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
APPENDIX
Updating the unit's firmware via the network
When the unit is connected to the Internet, you can update the firmware via the
network.
Firmware can also be updated by downloading a firmware update file from the
Yamaha website.
Firmware update procedures
Updating with MusicCast CONTROLLER (p.35)
Updating with a USB memory device (p.35)
STATUS indicator conditions
When a new firmware update is available, the STATUS indicator flashes slowly in
white after turning on the unit.
If an error occurred during firmware updating, the STATUS indicator will repeatedly
blink 2 - 7 times in red and 1 second off until the unit is turned to standby.
Note
Do not operate the unit, turn it to standby or disconnect the power cable or network cable during a
firmware update.
A firmware update takes about 10 minutes or more (depending on your network connection speed).
If the Internet connection speed is slow, or the unit is connected to the wireless network, a firmware
update may not be possible depending on the condition of the wireless connection. In this case, try
updating again after a while or update the firmware using a USB memory device (
p.35).
After a firmware update, check the version of firmware currently installed on the unit using the MusicCast
CONTROLLER.
For details on firmware updates, visit the Yamaha website.
Updating with MusicCast CONTROLLER
When a new firmware update is available, a message prompting you to update
appears in the MusicCast CONTROLLER screen.
Follow the procedure on the MusicCast CONTROLLER screen to update the firmware.
Updating with a USB memory device
You can update the firmware using a USB memory device. Download the firmware
update file from the Yamaha website to a USB memory device on a PC, and then
connect the USB memory device to the USB jack on the unit.
1
Turn the unit to standby and disconnect the power cable from the
AC wall outlet.
2
Connect the USB memory device to the USB jack on the rear
panel.
3
While holding down (CONNECT) on the front panel, plug the
power cable to the AC wall outlet.
The firmware update starts. During firmware updating, the STATUS
indicator lights up in blue, and the NET indicator and (Bluetooth)
indicator flash alternately.
En
35
35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

yamaha-wxa-50

Suche zurücksetzen

  • Der WXA regelt ständig auf volle Lautstärke und reagiert nicht auf die Lautstärkeregler sowohl am Gerät, am Handy und der Fernbedienung. Der LS Schalter ist auf PRE AMP eingestellt. Eingereicht am 17-3-2018 14:35

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha WXA-50 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha WXA-50

Yamaha WXA-50 Bedienungsanleitung - Deutsch - 45 seiten

Yamaha WXA-50 Bedienungsanleitung - Deutsch - 116 seiten

Yamaha WXA-50 Bedienungsanleitung - Englisch - 52 seiten

Yamaha WXA-50 Bedienungsanleitung - Holländisch - 116 seiten

Yamaha WXA-50 Bedienungsanleitung - Holländisch - 45 seiten

Yamaha WXA-50 Bedienungsanleitung - Dänisch - 116 seiten

Yamaha WXA-50 Bedienungsanleitung - Französisch - 52 seiten

Yamaha WXA-50 Bedienungsanleitung - Italienisch - 116 seiten

Yamaha WXA-50 Bedienungsanleitung - Spanisch - 52 seiten

Yamaha WXA-50 Bedienungsanleitung - Schwedisch, Norwegisch, Finnisch - 116 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info