Bedienungsanleitung Yamaha YAS-93 (Seite 13 von 162) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

554722

Zoom out

Zoom in

Vorherige Seite

1/162

Nächste Seite

Playing back audio from a Bluetooth device on the

sound bar

1 With the sound bar turned on, press the BLUETOOTH key on the

sound bar’s remote control to select Bluetooth as the input source.

The BLUETOOTH indicator on the front panel lights up in green.

2 Turn on the Bluetooth device.

When Bluetooth connection is made correctly, the BLUETOOTH indicator of the

sound bar flashes 3 times.

3 Play back a song on the device.

NOTE

• Perform Bluetooth connection with the device and sound bar within 10 meters (33 ft) of each other.

• It may be necessary to select “YAS-103 Yamaha” in the Bluetooth device list again, in the event that a

connection problem occurs. You may have to change the output setting to output audio to the sound bar,

depending on the Bluetooth device you are using.

• Adjust the volume level of the Bluetooth device as required.

• If a Bluetooth device is already connected to the sound bar, terminate that Bluetooth connection, then

connect with the new device.

Terminating Bluetooth connection

Bluetooth connection is terminated in the following cases. When the Bluetooth

connection is terminated, the BLUETOOTH indicator flashes once.

• The Bluetooth compatible device is turned off.

• The BLUETOOTH key on the sound bar’s remote control is pressed for more than 3 seconds.

• The sound bar is turned off.

Using the Bluetooth standby mode

The Bluetooth standby mode allows you to turn on (or off) the sound bar automatically,

that interlocked by the operation of the Bluetooth device.

How to set

With the sound bar turned on, hold down the BLUETOOTH STANDBY key

on the sound bar’s remote control for more than 3 seconds.

Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the

mode between enabled and disabled.

When the Bluetooth standby mode is enabled and the sound bar is turned off, the

STATUS indicator lights up in red.

Using the HOME THEATER CONTROLLER application

By installing the dedicated free application “HOME THEATER CONTROLLER” to a

Bluetooth device, such as a smartphone, you can perform various operations easily and

conveniently with the Bluetooth device. (Setting items: basic operation, sound-field,

sound adjustments)

For details on “HOME THEATER CONTROLLER”, see the product information on our

website.

Lights up

Flashes 3 times

Functions available on Bluetooth devices with Bluetooth standby mode enabled

Power on interlock function (when the sound bar is turned off)

When Bluetooth connection is made on the device, the sound bar will turn on and will be ready to play

back sound from the device.

Power off interlock function (when the sound bar is turned on)

The sound bar will be turned off when Bluetooth connection is terminated on a Bluetooth device. (Only

when BLUETOOTH is selected as the input source.)

Flash 3 times (enabled), flash once (disabled)

Lights up (red)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha YAS-93 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info