Bedienungsanleitung Yamaha YDP-160 (Seite 26 von 44) (Englisch)

599678

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Recording your Performance

YDP-160/140 Owner’s Manual

Recording your Performance

Your digital piano’s recording function enables you to record your performance of one song.

The recorded performance is called the “user song.”

Follow the steps below to record and play back your performance.

The user song is saved as a

Standard MIDI ﬁle (SMF).

(page 32)

To transfer and play the user

song on another device, you

must have Musicsoft Down-

loader (page 32) installed on

your computer.

CAUTION

Be careful not to erase the recorded data:

After you record a performance on this instrument, the [PLAY] button indicator lights

up. When this indicator remains on, recording another performance will erase the

recorded data.

You cannot engage Record mode

while a demo song is playing.

Recording capacity

“Recording capacity” is the

maximum amount of perfor-

mance data that you can

record. This instrument’s

recording capacity is 100 KB

(approximately 11,000 notes).

Changing the settings for the

recorded user song

If you wish to change the voice

of the user song, before press-

ing the [REC] button, select a

different voice. Then, press the

[REC] button to engage Record

mode. Without playing the key-

board, press the [REC] button

again to apply the change to the

song. If you wish to change the

tempo, do so after you engage

Record mode.

You can save the recorded user

song to a computer. You can

also load the user song data

from a computer and play it back

on this instrument. (See

page 32.)

1. Select a voice and other settings for the recording.

While holding down the [PIANO/VOICE] button, press one of the C1–A1 (YDP-

160) or C1–F1 (YDP-140) keys to select the desired voice(s). (See page 19.)

If you desire, you can select other settings, such as the reverb setting.

Use the

[MASTER VOLUME] control to adjust the volume to a comfortable lis-

tening level. You can also use the [MASTER VOLUME] control to adjust the vol-

ume level during playback.

2. Engage Record mode.

Press the [REC] button.

The

[REC] button indicator ﬂashes. (It may take a moment before the indicator

starts to ﬂash.)

Press the

[REC] button again if you wish to cancel Record mode.

3. Start recording.

Recording starts as soon as you play the keyboard.

Alternatively, press the

[PLAY] button to start recording.

The

[REC] button indicator lights up steadily, and the [PLAY] button indicator

ﬂashes at the current tempo.

4. Stop recording.

Press the [REC] button.

CAUTION

Do not turn off the power to this instrument while it is recording the data in its internal

memory (that is, while the [REC] and [PLAY] button indicators are ﬂashing). Otherwise,

all recorded data, including the data being recorded, will be lost.

Audio recording and data recording

Cassette tape recordings use a different data format than this instrument. Cassette

tapes record audio signals. On the other hand, this instrument records information

about the notes and voices being played and about the timing and tempo of those

notes. It does not record audio signals. When you play back a recorded performance

on this instrument, its internal tone generator reproduces the sound according to

the recorded information.

Procedure

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha YDP-160 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha YDP-160

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info