Bedienungsanleitung Yamaha YDP-S52 (Seite 2 von 8) (Englisch)

607372

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

YDP-S52 MIDI Reference

MIDI Functions

When this instrument and a computer are connected with a USB cable, MIDI communication can be performed. The

explanations here cover the settings necessary for performing MIDI communication between both devices.

For instructions on how to connect this instrument to the computer, refer to the “Computer-related Operations”

downloadable from the Yamaha Manual Library.

MIDI transmission channels

in Dual

Voice 1 data is transmitted on

the channel set up here.

Voice 2 data is transmitted on

the next greater channel

number relative to the specified

channel.

MIDI receive channel = ALL:

This allows simultaneous

reception of different parts on

all 16 MIDI channels. When

SMF Song data is played back

on a computer with the Voice of

this instrument, this setting is

selected. However, when a

Voice not available on the

instrument is specified, the

playback sound may not be

suitable.

MIDI receive channel = 1+2:

This allows simultaneous

reception on channels 1 and 2

only. When SMF Song data is

played back on a computer,

this setting is selected for

playing back only data of

channels 1-2 on this instrument.

Panel settings (Voices, etc.) of

this instrument will not be

affected by MIDI messages

received from a computer.

Data for the demo song and

piano preset songs cannot be

transmitted via MIDI.

In order to perform MIDI communication between this instrument and a computer, it is

necessary to match the corresponding MIDI transmit and receive channels. By setting the

MIDI transmit channels on this instrument, the setting of the keyboard or pedal performance

or the program change can be transmitted over the channel number corresponding to a

specified channel on the computer. By properly setting the MIDI receive channels on this

instrument, only data of the specified channel will be played back in the MIDI data received

from the computer.

Setting the Transmit Channel

While holding down [DEMO/SONG] and [PIANO/VOICE], press the C1 – E2 keys.

Setting the Receive Channel

While holding down [DEMO/SONG] and [PIANO/VOICE], press the C4 – F5 keys.

“Local Control” refers to the fact that, normally, the keyboard of the instrument controls its internal tone generator,

allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal

tone generator is controlled locally by its own keyboard. Local Control can be turned off as desired, so that the keyboard

of the instrument does not play the internal voices.

Default setting

While holding down [DEMO/SONG] and [PIANO/VOICE], press the C6 key. Pressing the

C6 key repeatedly toggles between Local Control On and Off.

MIDI Transmit/Receive Channel Selection

C1 C4

E2 F5

1 1 14 169

5 6 8 10121315

OFF

742 1 1 14 169

5 6 8 10 12 13 15

1+2

ALL

742

Transmit Channel

(C1 – E2)

Receive Channel

(C4 – F5)

Local Control ON/OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha YDP-S52 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha YDP-S52

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info